Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2007
    Location
    Orlando, FL
    Posts
    222

    front chainring shifter question

    To disable ads, please log-in.

    my friend had an accident that has drastically limited his left hand strength and movement - he has dura-ace brifters on a double crank bike..

    i wondered if anyone knew if the womens shimano ST-R600 Short Reach STI Shifters off my triple-crank bike would work if we swapped them across onto his dura-ace double bike as a temporary measure to get him out riding again sooner rather than later- it is just the left hand that is an issue.. and i THINK we both have 9 speed rear cassettes anyway, so am pretty confident the right hand controls would not be a problem..

    thanks for your input!
    batsheva

  2. #2
    Join Date
    Aug 2008
    Posts
    2,841
    You could do it... you can set the derailleur screws so that the chain won't shift off if he accidently shifts down from the third gear.

    But maybe putting a bar end shifter on his left side would be less work for both of your bikes.

  3. #3
    Join Date
    Jan 2006
    Location
    Massachusetts
    Posts
    2,556
    I agree with Catriona that a bar end shifter would likely be easier for him to use. Much less hand strength involved.
    Oil is good, grease is better.

    2007 Peter Mooney w/S&S couplers/Terry Butterfly
    1993 Bridgestone MB-3/Avocet O2 Air 40W
    1980 Columbus Frame with 1970 Campy parts
    1954 Raleigh 3-speed/Brooks B72

  4. #4
    Join Date
    Sep 2006
    Location
    Washington, DC
    Posts
    1,315
    I agree also. Plus, the throw on DA front levers is VERY short (and easy), compared to other Shimano components. So assuming his fingers can reach as far, then moving to other brifter-type Shimano shifters would make things worse.

    Instead of bar end shifters, can he rig it to take a downtube shifter on that side? I don't remember how they used to rig Lance's Treks. In the Tour, he'd use a front DT shifter because it provides more trim.

  5. #5
    Join Date
    Jan 2006
    Location
    Massachusetts
    Posts
    2,556
    Depends on what motion is easier for him. A downtube shifter you grab between thumb and hand and move with your wrist and arm. A bar end shifter is moved with the outer fingers and wrist.
    Oil is good, grease is better.

    2007 Peter Mooney w/S&S couplers/Terry Butterfly
    1993 Bridgestone MB-3/Avocet O2 Air 40W
    1980 Columbus Frame with 1970 Campy parts
    1954 Raleigh 3-speed/Brooks B72

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •