Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2009
    Location
    Montreal, Quebec
    Posts
    30

    Bike cover to recommend ?

    To disable ads, please log-in.

    I will be driving from the East coast to the West coast, and back, this summer, with my brand new bike on the bike rack (the kind that hooks in the hitch of the car). I have been advised to put a bike cover because debris from the road would just ruin the bike (chip the paint, dust in the gears, etc.). I have shopped high and low for this. I find either cheapees that will tear at anything. Or huge bulky ones that will prevent the car behind me from seeing my braking lights when they come on (my bike is just a few inches wider then the back of the car). I'm just about to go buy some plastified textile and do it myself! I saw one bike cover where, ingeniously, the lower exterior corners of the bike cover were transparent (adressing the brake light issue), but it was made of such a cheap plastic film, it would probably last just a few handling. Any covers that people have used extensively and would recommend for this particular use, when their bike is on a car rack ? Mine is a Swagman, the kind where the bike just sits on its wheels in oval brackets, and there is a hook that holds the top bar, so no need for holes to go through the bike cover). Not sure if this is the right place in the forum or if I should have posted this in 'gears'. Sorry if I'm in the wrong area.
    Last edited by Fontinalis; 04-05-2009 at 07:49 AM. Reason: typos

  2. #2
    Join Date
    Sep 2008
    Location
    WA
    Posts
    138
    If you aren't going to be riding it a bunch along the way, how about getting heavy duty plastic wrap and wrapping the heck out of the bike? We did this when we had to fit 3 bikes & 3 people plus luggage inside a Saturn Vue. We didn't have the bikes on a rack, but the wrap did a good job protecting the bikes & car. I've seen pallets of big boxes, etc. wrapped & loaded on the back of trucks and it seems to remain intact. It isn't as quick as having something to quickly pull on & off, but may be an option.

  3. #3
    Join Date
    Apr 2009
    Location
    Montreal, Quebec
    Posts
    30

    Shrink wrap...

    Quote Originally Posted by LilBolt View Post
    If you aren't going to be riding it a bunch along the way, how about getting heavy duty plastic wrap and wrapping the heck out of the bike?
    I thought about it. Shrink wrap the thing. But it wouldn't enable me to ride my bike at the end of each day like I plan to do. I love to drive, but I can't stand being a whole day sedentary, sitting in a car driving. I need to move at one point. Or I become a very grouchy person. lol

  4. #4
    Join Date
    Apr 2006
    Location
    where the wind comes sweeping down the plain
    Posts
    5,251
    What about something that just covers the gears and derailleurs? If you cover the whole bike, it might act like a sail and not only slow you down, but use far more fuel because of the drag. Pygmy makes covers in lots of sizes. http://www.adventurecycling.org/stor...pygmy-pack.cfm
    It won't protect the paint as much, but will protect the gearing. We've traveled all over the country with our bikes on the back of our car, and I don't know that I've really had any cosmetic damage to the bikes from the road. The biggest issue is keeping the chain/gears clean.
    Check out my running blog: www.turtlepacing.blogspot.com

    Cervelo P2C (tri bike)
    Bianchi Eros (commuter/touring road bike)

    1983 Motobecane mixte (commuter/errand bike)
    Cannondale F5 mountain bike

  5. #5
    Join Date
    Feb 2009
    Location
    Melbourne, Australia
    Posts
    507
    Actually I had rim damage from gravel (resealing a road) that sand blasted the rim with stipple and made a nasty noise when braking so now we take the wheels off our bikes and put them in the car (in wheel bags).

    The only damage I have had to the frame was paint on my Al bike rubbing off when we didn't seperate the two bikes good enough but with one bike that shouldn't be an issue.

  6. #6
    Join Date
    Apr 2006
    Posts
    3,867
    Other than getting wet in the rain, I've never had any kind of damage to my bike from the road. I've driven to New Mexico and Vermont from Arkansas with bikes on the back of my Beetle. I thought about a cover, too, but I figured that would cut into my gas mileage so bad that I just didn't pursue it.

    Covering the drive train seems like a solution. If you're worried about the rims like someone else said, you could put a wheel cover on with a hole poked through it for the skewer, I guess?

    Karen
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    insidious ungovernable cardboard

  7. #7
    Join Date
    Apr 2009
    Location
    Montreal, Quebec
    Posts
    30

    Temporary solution

    I bought a lightweight but relatively tough plastic transparent drop cloth for painters. Found that in the hardware store. It fits in my pocket when it is folded. But opened, it is immense, so I can sort of wrap my bike in it. A couple bungee cords, and off I go. I know that the chances of having scratches and all on a unprotected bike are slim, but when you just bought a brand new bike, you get a little irrational about it, don't you ? lol
    So, for now it will have to do. Thanks for all the tips and tricks.
    Last edited by Fontinalis; 04-07-2009 at 10:35 AM. Reason: typos

  8. #8
    Join Date
    Nov 2005
    Location
    Between the Blue Ridge and the Chesapeake Bay
    Posts
    5,203
    I put pipe insulation around the tubes to protect the paint for long trips. You can get it at home improvement stores for cheap, and tape it on.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •