cassette lock ring

[Miranda]

Some come with, some do not. Even within a manufacturer - some Campy cassettes do, some don't. Usually, you can just use the lock ring from the old cassette, but that won't work for you, now, will it?

From Competitive Cyclist:
If you've purchased an 11/21 or 11/23 Campagnolo 10-speed cassette, they supply you with an 11t-specific lockring. If you've purchased one in any other ratio, they supply no lockring. Why? Because every 10-speed Campagnolo rear hub and prebuilt rear wheel was supplied with a lockring that functions with 12t and 13t high gear cassettes. These lockrings are non-interchangeable, i.e. the 11t lockring won't work with cassettes that start with a 12t or 13t cog. They're made from steel with a 27mm O.D.

These Campagnolo Cassette Lockrings are for 10-speed cassettes (all 11-speed Campagnolo cassettes come with lockrings).

My components on my main roadie are Shimano Ultergra... 50/34 compact with 12-25 cassette 10 speed.

I bought the Park tools... chainwhip, wrench, and Shimano specific guide pin tool for cassette.

Just looking at getting another 12-25 cassette same Shimano Ultergra. And the wheel set was bought with the Shimano compatible hub.

Sounds like what I am looking at, I'm good to go.