Tektro Brake Lever question

[sarahspins]

The 100's are the compact ones.. the other version would be the R200, and they are much bigger. I don't know what significance the 'a' has in that.. and I don't know that the reach can be adjusted on these. I have pretty small hands (my motocross gloves are xxs, my bike gloves are smalls because they didn't have anything smaller), and on my Mixte (which has the R100's) with my hands in the drops, I can reach the levers with no problem. I can't say however, that I really like braking in that position... I prefer to brak from the hoods or from the top of the bars (w/ my cross levers).

You can have cross brakes put on the bars no problem, which may help your confidence a lot.. I have RL720's on both my Mixte and my new (to me) road bike. They're not very expensive.. I paid around $25 for the ones I put on the mixte including shipping, but odds are good most LBS would have them in stock (I didn't check, but mine is a fair drive away and it's not often I can go without dragging at least one kid with me, so it's easier for me to order stuff). Since the bar tape needs to be partially removed to put the cross levers on on, you could have the positioning of the R100's fine tuned at the same time - and you'll want to make sure the cross levers are in a good position for you as well.

I like the cross levers a lot.. you probably would too Some people think they're like "cheating" - sort of the way all the "road" bikes in the 80's had the dual brake levers, but these are different, and work much better... I think I read something somewhere that you actually get better braking power with the cross levers than the aero levers.

[Catrin]

.................

I like the cross levers a lot.. you probably would too Some people think they're like "cheating" - sort of the way all the "road" bikes in the 80's had the dual brake levers, but these are different, and work much better... I think I read something somewhere that you actually get better braking power with the cross levers than the aero levers.

hmmmm this is good information, thanks!. I had already figured out that the cross levers weren't expensive - I just don't feel overly confident with the main brake levers since I can only get two fingers to touch them... I am going to wait and see what my fitter/LBS recommends, but I won't cry if I wind up with the cross levers.

Looking forward to riding my new bike outside, finally, late this afternoon! Now it is time for bed

[malkin]

I have short reach levers and travel agents on my CrossCheck and I love it.


My hands aren't particularly small, but.. in terms of strength, I sometimes get tired playing piano... and my joints have all been performing (mostly) reliable service for over a half century.

I'll put up a pic of the brake set up if you are interested.

[Catrin]

I have short reach levers and travel agents on my CrossCheck and I love it.


My hands aren't particularly small, but.. in terms of strength, I sometimes get tired playing piano... and my joints have all been performing (mostly) reliable service for over a half century.

I'll put up a pic of the brake set up if you are interested.

Yes, that would be great! I DO have a small touch of arthritis in my hands - I am unsure if this is part of the equation or not. I've noticed that after about an hour on my Trek 7.6 my hands start acting up, though nothing like what 2 miles did on my LHT There are likely multiple things going on here, including posture.

[malkin]

K.
I'll pass it on to Brewer and he'll probably get pics up for you tomorrow.


I'm not sure if it's arthritis or not for me (who am I kidding? Of course it's arthritis if it isn't something more weird) but the big joint of my thumb is sometimes uncooperative and my wrists would generally prefer to stay in where it's safe, warm, and there's no pressure.

[brewer]

Here is the solution I worked out for Malkin. I wanted to acheive maximum braking power using a short-reach road lever with minimum effort. So I assembled the following components:
1) Cane Creek SCR 5C levers (http://www.canecreek.com/component-o...=levers-scr-5c),
2) Cane Creek Direct Curve 3 Brakes (MTB V-style http://www.canecreek.com/component-o...direct-curve-3),
3) ProblemSolvers TravelAgent (http://www.problemsolversbike.com/pd...avel_agent.pdf).

The levers provide short-reach, the V-brakes provide maximum braking power. In order to get the road levers to work with the MTB brakes, the TravelAgent is required because the V-brakes require a greater pull than can be accomplished with the road levers. A side benefit is that there is a leverage effect that results in less effort required for a LOT of braking power. The trikiest bit of the assembly is installing the TravelAgents. If you aren't experienced, have your LBS do this for you. Really.

Cheers!
Brewer

[Catrin]

Here is the solution I worked out for Malkin. I wanted to acheive maximum braking power using a short-reach road lever with minimum effort. So I assembled the following components:

1) Cane Creek SCR 5C levers (http://www.canecreek.com/component-o...=levers-scr-5c),
2) Cane Creek Direct Curve 3 Brakes (MTB V-style http://www.canecreek.com/component-o...direct-curve-3),
3) ProblemSolvers TravelAgent (http://www.problemsolversbike.com/pd...avel_agent.pdf).

The levers provide short-reach, the V-brakes provide maximum braking power. In order to get the road levers to work with the MTB brakes, the TravelAgent is required because the V-brakes require a greater pull than can be accomplished with the road levers. A side benefit is that there is a leverage effect that results in less effort required for a LOT of braking power. The trikiest bit of the assembly is installing the TravelAgents. If you aren't experienced, have your LBS do this for you. Really.

Cheers!
Brewer

Brewer,

I certainly am not experienced enough right now to do anything other than change an inner tube - so I wouldn't try this. My LHT has cantilever brakes currently. I have been wondering about a different style lever, and possibly bars, should my problem continue. I greatly appreciate this information and if our initial efforts don't solve my problem this just might be the way to go. I will find out if these levers are more compact than the Tekro r100a levers that were supposed to have come with my bike. Thanks for the information!