Pump vs cartridges (tools, tools, oh my)

[Catrin]

....if there's anything carbon fiber on your bike, a decent low-range torque wrench with 4 and 5 mm hex (Allen) sockets.

The bike has a carbon fork - I know I am showing my ignorance here - but is there anything there that I might need to adjust? If so, then I will look for the low-range torque wrench.

[OakLeaf]

The bike has a carbon fork - I know I am showing my ignorance here - but is there anything there that I might need to adjust?

Not unless the steerer tube is carbon, in which case you'll need to be careful not to over-tighten the stem - but most likely it's alloy. You're right, I was overly broad - I was thinking of frame, handlebars, stem and seatpost.