Saddle Fit: Tests, Tips, and Tricks

[VeloVT]

My sb's measure about 125mm. Love my 132mm Ariones. Found Fizik's "women's performance" saddle, the Vitesse HP, a bit wide, and likewise found BF's old 143mm Specialized Alias too wide in back.

My anatomy does not get on well with cutouts at all. I'm much more comfortable without one...

BF is currently riding a Selle Italia Flite Gelflow (about 130mm). It's ok, I think I'd do better on the SLR if I were going to choose a Selle Italia saddle.

[KnottedYet]

Start with a Brooks by leveling the NOSE, not the entire saddle.

The cantle (the bit at the back) will rise slightly higher than the forepart of the saddle.

Don't forget there is a cantle plate under the rear of the saddle. When you sit on the leather, it hammocks under your butt. You end up sinking a bit lower at the slightly higher rear of the saddle, essentially bringing the hammocking bit down to about the same approximate height as the nose, BUT ONLY WHILE YOU ARE ON IT.

If you level the saddle from tip-to-tail instead of at the nose only, you may end up with some pain in front.

[KnottedYet]

First check all the obvious suspects: loose clamp, squeaking springs (if you've got 'em), creaking frame joints under the cantle.

Then check the not-so-obvious nose end. All that hardware at the tensioning bolt can creak. And the real odd bit to check is the half-ball and socket joint (yes, there is one) at the very front of the saddle. The easiest way I've found to oil that joint is to squirt oil on it from the back half. That is the cause of probably 99.999% of the creaking of my B67.

Nose creaks can propagate through the frame and sound like they are absolutely positively no-doubt-about-it coming from the back of the frame. Don't forget to check the nose!

[bismarckgimpy]

I may need to run to my LBS to get that gel. I have a Terry Butterfly that starts to get uncomfortable after 1 1/2 hours of riding. I assume it will be around 7". I wear a size 12 when I'm in good shape. Right now, I wear a size 14. So I have those good birthing hips. KnottedYet, I'm checking into the Brooks saddles that you list. Those are wider and may work for me.

[KnottedYet]

Pants size and hip width have very little to do with pelvic outlet diameter, it's seems weird but it's true.

There is a thread somewhere with a gajillion different ways to measure your own bones, you don't need to go to an LBS and sit on their butt-o-meter. You can do it yourself with just a tape measure.

Terry saddles are generally on the wide side. Your saddle may be wide enough, but the shape or the padding may be causing you problems.

Before you buy any saddle it's a good idea to get your measurements (try a few ways of measuring) and puzzle out what about your current saddle is causing you the trouble.

Start a thread with your measurements, your current saddle, and the problems you are having; and I *guarantee* you will have several folks chirp up with suggestions to help!

[bismarckgimpy]

Thanks, I'll do that. In looking at saddles, the wider ones always seemed so soft. I tried one of those and after a half hour (can't remember the brand, I sold it), the softness was getting to me. So I figured all the wide saddles were meant for people who wanted soft, gushy rides. I like a saddle that is a bit firmer. So I figured the medium-wide saddles were best. The Terry feels better than the squishy one. But after a 1 1/2 hours it is not comfortable.

The Brooks saddles interest me. The B-67 is a wider saddle, but a firm one. I'll get those sitbones measured. I'll send the kids outside so they don't think mom is whacked out.

[BleeckerSt_Girl]

Just because a saddle is wide doesn't mean it has to be soft and foamy/gel/cushy. Brooks B68=perfect example of a WIDE saddle that is VERY firm with NO padding.