Looking small replacement parts: rear tail light attachment piece

[Becky]

Could you make one from a stainless steel blank from a hardware store? SS blanks come in all sizes, and are pretty easy to cut or drill. I fashioned a fender bracket from one.

[Blueberry]

Ah - that makes sense

I wonder if you could use a rack support - lots of racks come with multiple supports, and my lbs usually has lots of them left over...

Good luck!

CA

[Ana]

Could you make one from a stainless steel blank from a hardware store? SS blanks come in all sizes, and are pretty easy to cut or drill. I fashioned a fender bracket from one.

What are these things of which you speak? Where would I find one (hardware store, bike store, etc)?

[Becky]

What are these things of which you speak? Where would I find one (hardware store, bike store, etc)?

They're just little strips of stainless steel, about 12" long, and in different widths and gauges. My fender bracket is made from a 1/2"-wide piece. My local hardware store has them over with the screws and bolts and such. I would think that Home Depot or Lowes would have them as well, but I don't know exactly where in a store that big.

[Ana]

They're just little strips of stainless steel, about 12" long, and in different widths and gauges. My fender bracket is made from a 1/2"-wide piece. My local hardware store has them over with the screws and bolts and such. I would think that Home Depot or Lowes would have them as well, but I don't know exactly where in a store that big.

Ah, I see. So they bend readily? The part I'm looking for is quite bendy

Thanks!

[Becky]

So they bend readily?

Yep, depending on the width and gauge, of course.

[withm]

Lowes or Home Depot - get a piece of angle braclet - very cheap

[Zen]

Lowes or Home Depot - get a piece of angle braclet - very cheap

Do you mean angle bracket?