Your measurements?

[sandra b]

Has anyone used The Seat? (http://www.thecomfortseat.com/)

I talked to a couple at Pike Street market last weekend, they had it on the back of a tandem, and they both raved about it, saying they took newbies out on long rides with no discomfort.

I want to know how it works on a road bike, instead of an upright position.

[mimitabby]

The only thing i'd wonder about is loss of control. having that pointy nose part between your legs gives you something to grip.
The standard saddles leave so much to be desired, i am just not sure it
is worth it or wise to punish yourself long enough to get used to one.

i look at the seats on some road bikes and I am amazed that someone considers that something they'd like to sit on even for a little while.
I mean the inside of your buttocks which is where that thing goes is so delicate. there are tiny nerves and blood vessels, skin and bone. and it's not THICK skin either. if your seat is not supporting your sitting bones (and how could it if it is 4" across?!) it's digging into areas that were never meant to bear weight in the first place!

[donnambr]

I did the paper on the hard floor measure, as well as folding my yoga mat in half and measuring the indentations. 7 inches both times. Somehow, I'm not surprised. Runs in the family. The saddle width of the Velo Plush on my bike is about 6 inches at its widest, and I have been wondering about whether I could be more comfortable than I am as my rides have gotten longer. I think I'm going to take a hard look at the B-67.

[KnottedYet]

I should be getting mine in the mail day after tomorrow.

[khgulledge]

hi everyone,

i'm new to these boards and in search of a new saddle to replace the stock that came on my trek pilot 5.0 wsd.

i'm having issues with pain in the area where my legs attach...also girly parts are starting to get mashed. i have found that i do ok as long as my rides are short in length (timewise), say, less than 2hr. but after that, on longer rides (like 4hr this past saturday), there was pain in the joint area and too much mashing. ended up with some lower back pain as well. i spend most of my time on the hoods, but would like to ride in the drops more, but there is just WAY too much mashing to be anywhere comfortable doing that. there also seems to be more mashing while on the hoods unless i sit up a lot more.

i haven't done the paper on the sidewalk measurement yet, but did do the "sit on your hands and have your husband measure between where you felt the bones" measurement. that came out to be around 5-5.25" or close to 130mm. i just don't know where to start when selecting a saddle. i do gather that, if my sit bones are 130mm apart, that i would want to get a saddle that is, maybe, 140mm wide??

i'm going to call my lbs (specialized dealer) and see if they have an a$$-o-meter, get measured there and see what they recommend. i just don't want to go spend a 100 bucks on a saddle and it not be right or hard to return as i would hear about it from the non-riding spouse....

thanks, karen.

[melissam]

Karen,

You might consider getting a Brooks saddle from Wallingford bikes (www.wallbike.com). They have a 6 month return policy, so you won't risk being stuck with a saddle you don't like.

A B-17S is $67 -- less than the $100 you're thinking of spending.

Also, Bill would probably chat with you about what you should get given your sit bone measurements.

I read the Brooks saddle thread and I'm considering getting one myself.

-- Melissa

PS I don't recommend reading this thread while you're at work, because you might be tempted to try measuring your bones and it would be embarrassing if someone came up to your cube while you were in the middle of measuring. I'm just sayin' is all...

[kiwi girl]

PS I don't recommend reading this thread while you're at work, because you might be tempted to try measuring your bones and it would be embarrassing if someone came up to your cube while you were in the middle of measuring. I'm just sayin' is all...

and I don't recommend reading this thread at work because you might read melissam's message and end up with pasta sauce all over your computer keyboard from laughing so hard

[khgulledge]

went to the lbs and had some adjustments made: had the nose of saddle lowered some so that it's tilted downward. that helped a lot, but last weekend, i had a 62 & 48 mi ride over the weekend and developed a rash on the inside of my thigh near the crease, so i haven't ridden this week.

went back to lbs and they are letting me try out a terry butterfly saddle. will test it out tomorrow on my group ride.

Thanks for the reply. Karen.

Karen,

You might consider getting a Brooks saddle from Wallingford bikes (www.wallbike.com). They have a 6 month return policy, so you won't risk being stuck with a saddle you don't like.

A B-17S is $67 -- less than the $100 you're thinking of spending.

Also, Bill would probably chat with you about what you should get given your sit bone measurements.

I read the Brooks saddle thread and I'm considering getting one myself.

-- Melissa

PS I don't recommend reading this thread while you're at work, because you might be tempted to try measuring your bones and it would be embarrassing if someone came up to your cube while you were in the middle of measuring. I'm just sayin' is all...