One bike for everything?

[snyderd25]

Thanks for the info! Unfortunately my current bike does not fit well. I think it's too small. I put way too much weight on upper body and now have nasty tendinitis in my elbows. It's a 51 cm specialized dolce from 2007. I am 5'6".... And I guess I better figure out those other measurements!

Thanks for he help!

[indysteel]

Have you ever had a fitting? Sometimes you can remedy having too much weight in your upper body by moving the saddle back. I know it may seem counterintuitive but it's worth a shot.

[snyderd25]

Have you ever had a fitting? Sometimes you can remedy having too much weight in your upper body by moving the saddle back. I know it may seem counterintuitive but it's worth a shot.

Lots of fittings. Three this past spring. Couldn't get it right. Maybe it's not fixable?

[indysteel]

Lots of fittings. Three this past spring. Couldn't get it right. Maybe it's not fixable?

Oh, that's a shame. If after three fittings, it still isn't comfortable, then I'd say either the bike just isn't for you or that you have a physical issue that is causing your pain. I'd be hesitant to buy a new bike without the input of a fitter. Is is that your hands hurt?

[OakLeaf]

I think she said elbow tendinitis. Gripping the bars too tightly is what I'd suspect ... that might be a fit issue directly with bars the wrong width or bend, or it might be an indirect thing where she's hanging on for dear life because the bike feels squirrelly, or it might just be a bad habit.

snyderd, what's your preferred hand position? Do you change positions now and then during your rides (hoods, drops, tops if there's room)? Do you shake your arms and hands out periodically? Do you notice yourself (or did your fitter notice you) gripping too tightly? You said three fittings, but how many different handlebars did you try?

[snyderd25]

..... One Bike to rule them all, and in the darkness bind them ...


Sorry. I really tried to resist. I really did.

I think she said elbow tendinitis. Gripping the bars too tightly is what I'd suspect ... that might be a fit issue directly with bars the wrong width or bend, or it might be an indirect thing where she's hanging on for dear life because the bike feels squirrelly, or it might just be a bad habit.

snyderd, what's your preferred hand position? Do you change positions now and then during your rides (hoods, drops, tops if there's room)? Do you shake your arms and hands out periodically? Do you notice yourself (or did your fitter notice you) gripping too tightly? You said three fittings, but how many different handlebars did you try?

I ended up with both tennis and golfers elbow in both elbows while training for century ride this spring. That's why I thought the relaxed fit of the casserole might work out. I definitely grip too tight, but I also put a lot of weight on upper body. I suggested changing handlebars but the fitters ( i tried two) didn't want to. We changed seat post and 3 diff stems. I do move hands a bit, mostly from hoods to straight in front. I rarely use drops. I am unable to stand and pedal in this bike ( not sure if that's fit issue). I def shake out hands and arms and stretch along he way.

[Miranda]

Cyclocross bikes rock. Love, love, love mine.

It's just a cheap no brand name internet special. But the geometry was within one cm of my Orbea carbon roadie (input of two fitters). So I knew I was good to go in ordering it on my own.

Sorry to hear about your pain issues. I've had my share of pain as well. One source of which was my ill fitting first road bike (two frame sizes too big, sold to by a lbs, not associated with the other two fitters).

I know for me it seems my physical fittness plays a role in how much pressure I put on my hands. When I am lighter, stronger, I notice less in my hands.

Good Luck!