That's what I meant as well, With feet on ground the clearance should be at least 2 " but more is OK.Originally Posted by tattiefritter
That's what I meant as well, With feet on ground the clearance should be at least 2 " but more is OK.Originally Posted by tattiefritter
BCIpam - Nature Girl
I recently bought my first mountain bike, and although nothing is actually uncomfortable, I am beginning to worry that I should have purchased the smaller size. In particular, if you are new to mountain biking, your roadie instincts about proper fit may be very misleading.
I am 5'7 with a ~31.5"-32" inseam (long legs, short torso). The two LBS guys helping me with my purchase disagreed about whether I was a better fit for a 15" or a 17". I went with a 17" WSD Rockhopper, which actually has the reach of the 15" men's model, but the height of a 17" model. At the time I purchased it, I thought the reach was very close (almost too close) and my greater concern was that I might be buying a bike that was too small. (My understanding is that Rockhoppers are known as relatively short reach bikes, in contrast to Gary Fisher and others known for their longer reach). I have 3" of standover clearance and 6.5" of visible seatpost. I am not uncomfortable in any way, but I do have this nagging suspicion that the 15" would be more chuckable and nimble, as others have aptly put it.
PS: I have most often read 3"-6" of standover clearance is ideal, with standover measured by standing astride the bike, lifting it by the seat and bars, and assessing how far from the ground the wheels are.
Last edited by VW Beetle; 03-24-2006 at 03:04 PM.
Ok, now I am curious. I am 5'11" with an inseam of 36. What size am I looking at?![]()
I sat on a Trek 820 last night and liked it. No pink or yellow ones though!![]()
My Biking Blog![]()
Fat bottomed girls they'll be riding today
So look out for those beauties oh yeah
-Queen
It looks like the Trek 820 comes in a variety of sizes (you can check the website). Just find the hardtail mountain bike section. The 820 will be under the steel frame section. Then click on the geometry headline on top of the picture of the bike. The sizes range from 13-24" and the standover heights range from 23.5 to a whopping 34.3"Originally Posted by shasta
Just keep pedaling.
Thanks for the information Madisongrrl. I'll look it up.
My Biking Blog![]()
Fat bottomed girls they'll be riding today
So look out for those beauties oh yeah
-Queen
Measure yourselves up on the following site and see what they say for a bike fit:
www.wrenchscience.com
This system takes into consideration most of the important measurements in a bike fitting, and I think it will give you a good indication of what size bike you should be riding.
OK, I have done all the measurements and I really think I should be riding a smaller bike than I was originally fitted( is that a word?) on. I have enlisted the help of a local ironwoman/extrerra triathlete to come to the bike shop with me. Maybe two women telling them the bike is too bike will make them pay attention. Thanks again for all the help. Jones.
Sometimes you have to ride the bike awhile to get comfortable on it. You can also change out the stem length (shorten it) and pull the reach closer. I ride the 17" men's Spec. Stump and it fits me fine. I even have fairly short arms and I'm OK. I can't recall if I change out the stem. I might have. The 17 WSD s/b OK. If not, take it back to the shop and ask them to help you adjust the fit.Originally Posted by VW Beetle
Now strangely my Fisher has a shorter reach but it is a slightly smaller bike (16.5") so maybe that's why.
BCIpam - Nature Girl