Occasionally I'll misread what section threads are in, so I'm not surprised.But no, nothing's making noise here. I'm a little young for that, statistically speaking!
Occasionally I'll misread what section threads are in, so I'm not surprised.But no, nothing's making noise here. I'm a little young for that, statistically speaking!
At least I don't leave slime trails.
http://wholecog.wordpress.com/
2009 Giant Avail 3 |Specialized Jett 143
2013 Charge Filter Apex| Specialized Jett 143
1996(?) Giant Iguana 630|Specialized Riva
Saving for the next one...
It was creaking on today's ride again. I took it into the shop, so I'll find out what's wrong with it (and maybe have it back?) probably by Wednesday or Thursday. I doubt it'll need replacing. I know the components on this thing are crap, but I shouldn't need a new BB after 550 miles...
Now I have to find something else to do with my weekend.
At least I don't leave slime trails.
http://wholecog.wordpress.com/
2009 Giant Avail 3 |Specialized Jett 143
2013 Charge Filter Apex| Specialized Jett 143
1996(?) Giant Iguana 630|Specialized Riva
Saving for the next one...
I think mine had to be replaced at about 2,000 miles, which is still too soon. The LBS said that the bike came with a low end bracket and replaced it with a higher quality one. Whatever. Fortunately, it was not a very expensive part.
Grits
2010 Trek 5.2 Madone WSD, SI Diva Gel Flow
2002 Terry Classic, Terry Liberator
At least I don't leave slime trails.
http://wholecog.wordpress.com/
2009 Giant Avail 3 |Specialized Jett 143
2013 Charge Filter Apex| Specialized Jett 143
1996(?) Giant Iguana 630|Specialized Riva
Saving for the next one...
I've been dealing with an ongoing "creak" for the past few months. Took it in a few weeks ago and the mechanic tore apart my fork and headset (as that is where I could pinpoint where it was coming from). He ended up adding a few of these super thin metal spacers right where the headset meets the headtube. That seems to have solved the "creaking" noise, but now it's been replaced with a slightly less annoying noise - one that sounds like ball bearings crashing into each other.It's definitely not as loud and obnoxious as the creaking was, but I can still hear it and it bugs me. When it gets to the point where I can't tolerate it any longer, I'll have to bring it back in.
2012 Seven Axiom SL - Specialized Ruby SL 155
I had a nasty creak and the LBS solved it as being in the seat post. Last month I had a group training ride on a rural asphalt bike trail after it had rained. The bike accumulated a lot of grit and wet tree needles that clumped together around the brakes. At one point I hit a large bump at speed, my left cleat broke, my foot flew off the pedal, and the sudden abrupt movements caused something inside my seat post to shimmy out of adjustment, making the saddle go up and down like a rocking chair. On my way home after the ride the LBS was still open, I stopped, and he fixed the seat post for me, but I hadn't been home to clean the bike, and some grit got inside the seat post, so on my next ride I got significant creaking noises. It was time for my 1,000 mile maintenance and new tires, so took the bike back, he redid the guts of the seat post and no more creaking. Hope this information is helpful.
I have a strange creaking sound in what sounds like its in the bottom bracket. I replaced it once but it wasn't a high end bracket at all so I'm wondering if its just going bad again. It seems since the weather has been hot its worse??? It's almost a ticking sound? The crank arms are tight so it's not that. Any thoughts?![]()