Finding your right bra size can be challenging. Every country has its own bra-sizes, and sizes can vary quite a lot between different models.
Most calculators will give you a too big band-size, because the materials that are used for modern bras are very stretchy (and calculations are based on less stretchy materials). Because of that, to get a good fit, you often need to go down a band-size from the size that is suggested for your measurements and then need to go up 1 or 2 cup-sizes.
It's best to find the right band-size first. For the UK-system (UK and US sizes are the same as far as the band is concerned) you take your measurements under your bust (where the band should sit) in inch. Then, you add 4 to an even number, or 5 to an odd number. For example, you measure 28'' under your bust. Then you add 4 to this measurement = 32. This should be your band-size - BUT you should take this number with a grain of salt and go one (or sometimes even two) size(s) lower because the bands are usually a very stretchy material. So in this example you would end up with a 30 or 28 as band-size.
Calculating the right cup-size is a bit more tricky and I am not used to the american sizes. But if you have your right band-size, it's quite easy to just try different cup-sizes until you have a good fit.
Keep in mind that the band should carry most of the weight of your bust, so it should fit snugly, there should be no gaping under or between your breasts. A fitting cup should accommodate your breasts while giving some support and you shouldn't have a "4-boob-effect" which indicates that the cup is too small.
Most women tend to wear too big band-sizes combined with too small cup-sizes. Don't go up a band size to accommodate your bust, change the cup-size!
You can find some good bra-fitting guides on youtube.



Reply With Quote
