Picked-up a set of aerobars...now where to put my computer and light?

[nscrbug]

Ahhh...I see how it works now. Thanks for the pics. Looks like it would work fine...the only gripe I'd have with it, is the size of it...it looks rather large and cumbersome and I personally wouldn't like something that big cluttering up my handlebar area. But that's just me.

[zoom-zoom]

Yeah...it's not sleek from the look of things. Man, I wish I had broader shoulders so that limited real estate on my handlebars weren't such an issue.

[Velocivixen]

@zoon-zoom, just curious, since you mentioned 40 cm bars. Are you shoulders 40 cm also? I ask because when I test rode a road bike they measured my shoulders and said they were 40 cm, so that the bar should be that wide. I rode with a 40 cm and a 42 cm wide handlebars and I felt a difference, although not sure how to describe the difference. Your thoughts? What differences have you noticed? I'd appreciate your insight, given that I've read articles online talking about handlebar widths and some somewhat conflicting opinions.
Thanks.

[zoom-zoom]

My shoulders are actually 38, but my bike is a men's frame and 40 was the smallest handlebars available. My previous bike had 38...I can't really say that I notice a difference, but that's mainly because my 2 bikes handle so differently to begin with. My reach on my previous bike was really a bit too short for me. Current bike has a slightly longer top tube and a 20mm longer stem (started out with the shorter stem, but handling was scary and I felt cramped).

I can say that I wouldn't want my bars any wider, though. If they were wider I don't think I'd be comfortable riding on the hoods.

[alimey]

Actually the knob thing works really well. I often set up tri-bars for customers, who then can't see their computer. As long as you aren't using the hydration bottle that nestles between the aerobars, the bobble works perfectly. It comes in 2 lengths & the longer one is better. It's extremely light & simple. I have used it with a variety of computers - Cateye, Garmin 705, Garmin 800 & it's very solid.

Mind you - someone is making a lot of money from it - I would bet it doesn't cost much more than 50p to make - but in the UK it retails for about £12 . . . never mind - it does solve a problem very well.

[zoom-zoom]

Actually the knob thing works really well. I often set up tri-bars for customers, who then can't see their computer. As long as you aren't using the hydration bottle that nestles between the aerobars, the bobble works perfectly. It comes in 2 lengths & the longer one is better. It's extremely light & simple. I have used it with a variety of computers - Cateye, Garmin 705, Garmin 800 & it's very solid.

Mind you - someone is making a lot of money from it - I would bet it doesn't cost much more than 50p to make - but in the UK it retails for about £12 . . . never mind - it does solve a problem very well.

Yeah, they are $$ for something that I'm sure costs less than a quarter!

I ended up ordering 2 of the longer ones...maybe down the road I will come up with a different solution, but this one seems the easiest to implement from the start. I think I should be able to fit my Forerunner 305 pseudo-wrist on one and the quick-release base and little white Knog light on the other.

[goldfinch]

Zoom, do you have a link to this mount? I have the same issue. I put aerobars on my bike and I would like to sometimes have them on and sometimes not, so the computer mount on the bars is a pain.

[nscrbug]

My shoulders are actually 38, but my bike is a men's frame and 40 was the smallest handlebars available. My previous bike had 38...I can't really say that I notice a difference, but that's mainly because my 2 bikes handle so differently to begin with. My reach on my previous bike was really a bit too short for me. Current bike has a slightly longer top tube and a 20mm longer stem (started out with the shorter stem, but handling was scary and I felt cramped).

I can say that I wouldn't want my bars any wider, though. If they were wider I don't think I'd be comfortable riding on the hoods.

How does one take a proper measurement of shoulder width (for bike purposes)? I was told that my shoulders are 38 (my bars are 38 also), however...I feel that I'm very broad-shouldered since I have a lot of trouble finding tops that fit properly across my upper back/shoulder area. So now I'm wondering if I really am a 38 in my shoulders and if maybe a 40cm bar might be a better option for me?

[OakLeaf]

I've always read to measure across the back from acromion to acromion (the point at the outside top of your shoulderblades).

I've been measured at exactly 38 cm, but I can't comfortably ride bars narrower than 40 cm. How I knew is that when I started to fatigue on a long ride on the 38s that came on my bike, while riding on the hoods, my wrists would break to the outside. I'm very comfortable on 42 cm bars as well, just not as aerodynamic. Years ago I actually built up my race bike with 42s, they're that much more comfortable for me.

Some of it will depend on exactly where the manufacturer measures the bars, too. Center-to-center, outside-to-outside, hooks or bar ends? One company's 40 cm bars aren't going to feel the same width as another's.

[Becky]

I'm like Oak. By all accounts, I should ride 38s, but I'm much more comfortable with 40s. I like the extra leverage of a wider bar too.