Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 15 of 17

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    Weir, TX
    Posts
    403
    The stem should be a standard 1" quill stem (these are 22.2mm). Some older bikes, but not many (mostly Schwinn's), as well as BMX bikes, use 21.1mm stems and those are MUCH harder to find in configurations that are like what you are probably wanting.

    I bought this Kalloy stem for my Takara only to find out that I needed one of those smaller 21.1mm stems.. but it does fit in my Nishiki just fine (and may end up being used on another build.. which it seems is where most of the parts intended for the Takara are heading..).
    Last edited by sarahspins; 07-13-2010 at 02:49 PM. Reason: typo :P
    '08 Felt FW40 w/ Brooks b68's'
    '77 Takara Mixte (errand bike) w/ Brooks b68's'

    Measure your sitbones! Mine: 6 5/8" (168mm)

  2. #2
    Join Date
    Jun 2010
    Location
    Work in Asia, now based in Vienna, VA
    Posts
    54
    Oooh. Thank you. That's a nice looking stem and I especially like the rise. This will help it achieving the upright riding position they desire.

    Just out of curiosity, what bars have you liked most for that upright ride?

    Thanks, again.

    Owen (LL)

  3. #3
    Join Date
    Jun 2009
    Location
    Weir, TX
    Posts
    403
    I had planned on using VO porteur bars

    Since my stem didn't work though, I have to either find one that will, or start looking for another mixte
    '08 Felt FW40 w/ Brooks b68's'
    '77 Takara Mixte (errand bike) w/ Brooks b68's'

    Measure your sitbones! Mine: 6 5/8" (168mm)

  4. #4
    Join Date
    Jun 2010
    Location
    Work in Asia, now based in Vienna, VA
    Posts
    54
    While not as cheap, I've seen really nice bars on an Electra mixte.

    They sell them at: https://www.electrabike.com/store/

    You have to look to the "Ticino Parts Collection", then at the bars. You can also look at the Ticino bikes for a better idea of the look.

    Just because I'm a slow learner, do I understand that the VO bars WILL fit in that stem, but just didn't fit in your frame? (Sorry, I am a bit slow...) If they do, that may be my best combo for this Nishiki.

    Thanks.

    Owen

  5. #5
    Join Date
    Jun 2009
    Location
    Weir, TX
    Posts
    403
    Quote Originally Posted by LeicaLad View Post
    Just because I'm a slow learner, do I understand that the VO bars WILL fit in that stem, but just didn't fit in your frame? (Sorry, I am a bit slow...) If they do, that may be my best combo for this Nishiki.
    Yep, that's exactly it.. my steer tube is just too small.
    '08 Felt FW40 w/ Brooks b68's'
    '77 Takara Mixte (errand bike) w/ Brooks b68's'

    Measure your sitbones! Mine: 6 5/8" (168mm)

  6. #6
    Join Date
    Jun 2010
    Location
    Work in Asia, now based in Vienna, VA
    Posts
    54
    Thanks. I believe I have my solution.

    This is such a great forum. (insert genuflection here!)

    Owen

  7. #7
    Join Date
    Apr 2006
    Posts
    3,867
    Also, you don't have to lose that foam padding. Soap it up really good with soapy water and it should twist right off. Not that you want to keep it??

    Karen
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    insidious ungovernable cardboard

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •