There are probably lots of different ways, but with the brake levers you have on your LHT, they actually have a quick release button on the lever itself.. it's the little toggle buttons near the top of each one, you just push the button to the other side of the lever, and it gives you some slack in the cable. You may need to squeeze the levers a bit to push the buttons back the other way.




Reply With Quote

If you notice, the little "recess" for it when you push it to the other side is cut back further than what you see on the side that it's on.. which is what gives you the slack in the cable. As I said earlier though, to push it back and take the slack out you'll probably need to squeeze the lever a little to push it back over into the right place.
