I've often felt that my road tires where "okay" but then thought I should add some air, just in case. Granted, I usually let a shot of air out first, but even when I thought they were close, they can be down to 60 and still feel okay.
I've often felt that my road tires where "okay" but then thought I should add some air, just in case. Granted, I usually let a shot of air out first, but even when I thought they were close, they can be down to 60 and still feel okay.
For 3 days, I get to part of a thousand other journeys.
Sometime a better gage than your thumb is to sit on the bike with your full weight and see how much the tires depress, or how large the contact patch becomes. When riding, the danger is that a sharp jab on the tire, like hitting a pothole, will compress the tire all the way to the rim and result in a pinch flat. I assume the tire may see several times your weight in a dynamic condition like that, so you're balancing that possiblity with an adequate contact patch for traction.
Oil is good, grease is better.
2007 Peter Mooney w/S&S couplers/Terry Butterfly
1993 Bridgestone MB-3/Avocet O2 Air 40W
1980 Columbus Frame with 1970 Campy parts
1954 Raleigh 3-speed/Brooks B72
I really rely on the gauge.
This being said, if I find it really hard to pump, then I know I have to pump a few more times to get to 100 psi. (I run 100 psi and I have a hybrid too but the tires are made to handle it.)
Have you tried one of these pumps? I would not be w/out mine!!
http://www.sunandski.com/Serfas_WFP_...2064550615.htm
if i don't have access to a gauge i use a combo of squeezing the tire by hand and sitting on the bike. if you bike sinks quite a bit then the tire probably needs to pumped up more.
you can always find a portable tire gauge at your LBS that is small enough to fit in your seat bag. they look just like the ones you would use on your car only they are made to measure bike tires![]()