You don't have to go buy new platforms, just use the ones that came on your Trek.
I only have BMX pedals because I like them and use them all the time. They are expensive, and good ones cost as much as cleated pedals.
Don't buy what you don't need!
You don't have to go buy new platforms, just use the ones that came on your Trek.
I only have BMX pedals because I like them and use them all the time. They are expensive, and good ones cost as much as cleated pedals.
Don't buy what you don't need!
"If Americans want to live the American Dream, they should go to Denmark." - Richard Wilkinson
I hate the platforms that came on my Trek...they are not double-sided and I can't seem to keep my feet on them.
I am disgusted right now, I went out, and couldn't seem to NOT fall over. Stopping was fine, starting up was not. I think I am gun-shy now and then I fell over so hard that I thought I broke my elbow - and I know what that feels like...but it is ok.
So now the plan is to go back to platforms on my Trek - and also on my Surly. Then, when I am more comfortable with BOTH bikes, take the Surly, nice 26-inch tires, out into some nice flat grassy field and stay there until I get this worked out.
I don't think the problem is the pedals, really. I think the problem is my needing to know my bike better and to have better handling skills before I add the clipless pedals back into things.
I fell more today than yesterday...though none were as bad as the falls on Friday![]()
I fell yesterday...smack dab in the middle of a busy intersection too!It was my first ride of the season, so perhaps I was a bit "rusty".
Me and my riding buddy were in a left turn lane waiting for traffic to clear to complete the turn, when for some unknown reason my right foot which was down on the pavement, slid out from under me. Down I went, with my bike basically falling on top of me. What a sight that must of been for all the stopped cars! I'm sure many of them were probably laughing...oh well, I'm sure it won't be the last time.
I had a friend switch out my pedals, and he and his wife strongly encouraged me to try them out - and I succeeded in riding without falling over - yayI think they wanted to make sure I got back up on the horse before the work-week full of rain
![]()
It has been interesting to read this discussion. I have never, ever, thought to unclip both feet. What would be the point? It seems dangerous to me. If I am riding my road bike in traffic (which happens sometimes when I ride through my town center), I unclip my left foot and rest it lightly on my pedal (Speedplays). This works for short jaunts. I have campus pedals on my errand bike, so it's not an issue at all. I just rest my foot on the flat side.
You just have to keep practicing until it becomes natural.
I am so sorry to hear that you're not having fun with the clipless pedals.![]()
Reading your first message and now this one makes me wonder if perhaps the way you start off after stopping has something to do with your falls. It sounds like you're clipping in your foot right away, even before you're moving at any speed at all. I start pedaling with my strong legs, making soft contact (unclipped) with the other foot, and it will be a crank turn or two before I actually clip in with the other legs. It also REALLY helps to gear down to an easier ratio before stopping, so that starting off is a lot easier.
I hope you recover and feel better about this soon.
I had fun in-between the starting and stoppingI didn't clip in my left leg right away, but perhaps I was still moving too slowly when I did? I am not giving up on this - the advantages are obvious and I've invested too much in this system to easily give up. I just need to get my bike skills up enough to be able to add this without throwing everything else off - I think that is all that is going on. I sometimes barge straight ahead even when I shouldn't
Yep Crankin, practice is exactly what I needI think that a couple of weeks back on the platform pedals will help immensely. The more I know my bike before I put them back on, the better it will be. At least that is my current thinking. Am trying to not be frustrated, I just bought my very first bike in December, and there weren't many changes until now to ride...
Last edited by Catrin; 03-07-2010 at 02:49 PM.
I used to have lots of problems clipping in as I started to pedal. This article helped me a lot.
http://outside.away.com/outside/body...-20070330.html
I start with my left foot clipped in so that is the foot I start to pedal with. I don't actually get my butt completely on the seat before I start to push the pedal with my left foot, but I'm kind of resting on the nose of the saddle with my left foot around 1:00. As soon as I get going I slide back so I'm seated. It helps a lot, especially if I don't get clipped in with right foot on the first try -- I can still push the pedal with the right foot and I'm better balanced in general.
But I think you're right, it makes sense to get used to the bike more and then try again with the clipless pedals later. With practice it will all fall into place, and one day you'll look back on this and wonder what the fuss was about.
Catrin, I think switching back to your other pedals was a wise decision. I rode with flat pedals, then with toe clips, for 3 solid years before knowing I was ready for clipless pedals. I'm sure it will be a much better experience next time.
Look at what I found
http://bike.shimano.com/publish/cont..._mountain.html
I think these are perfect for the Long Haul Trucker. Platform/clipless on BOTH sides - which allows me to use BMX platform for now, and as I gain skills and confidence I can start practicing with clipless again without having to change pedals - or worry about which side to clip in.
Yeah, they are a little spendy, so will have to save for them, but I like these! My trainer thinks them the perfect solution as well. I have plastic BMX pedals, but am not a real fan of plastic, but they will do until I can get these.
I went back to the store and looked at these pedals - they do not operate quite like what was described to me...without clipping in the shoe won't reach the platform portion of the pedal. Bummer...but glad I double checked. Guess my LHT will get normal BMX pedals afterall![]()