Well, if you put a little piece on the light when you don't want to see it, and remove it when you do, you've got it made. I do that for my bike computer because I really dislike seeing the speed, but I want the stats at the end of the ride. I've also used a fabric bandaid.
You could also put a fat rubberband on that covers the light, since you already have rubberbands holding it together. Or a little piece of fabric under your existing rubberbands. That would be easier to remove and replace as needed.
Thanks for the suggestions.![]()
To turn off the LED you go into Profiles (I usually just click on the little speaker in the upper right corner, where you set it to vibrate). Scroll down to Advanced Options... Scroll down to your usual default profile (I usually only use phone only, to it's already selected on mine). Click on it, scroll down to what you want to change, click, and pick what you want.
Note that if you don't change it on all profiles, it will blink when you're on vibrate or silent or whatever.
Karen
~~~~~~~~~~~~~~~~~~~~~~~~~~
insidious ungovernable cardboard
Thanks Tuckervill, that's perfect. I guess I never looked under the "Repeat Notification" option.![]()
My iPhone is one of my best friends. If I don't have access to the computer, it IS the computer. Unless it is a long vacation and I really must work while gone, I never travel with my laptop anymore. The one thing I hope will change soon is more (legal) options for service/carriers. AT&T is fine in a lot of ways, but there are too many dead zones in NM and rural Colorado, where I spend a lot of time.
.... holding out for a Droid .....
Speed comes from what you put behind you. - Judi Ketteler