wheelbuilding

[lph]

Any wheelbuilders here? I have two wobbly rear wheels, and a penchant to learn how to build my own. Any tips or good ideas on the process would be welcomed. So far I'm reading up and it doesn't seem too complex, mostly a fiddly work of patience.

In the meantime - the rear wheel on my commuter bike will not stop wobbling (side to side play, a mm or two), though I've opened up the hub and replaced the bearings with new ones and greased liberally. But at least it stopped clicking and "grumbling". One of the outer cones (the one attached to the axle shaft, non-drivetrain side) seems a little pitted - would just replacing this one help? Or is the hub probably just worn out?

The rims and spokes are fine, but used, which is why I'd rather fix up the hub a little than buy or build something new.

ETA: I just (doh) did a search, and found some good tips have been offered here before. Will read closely. In case anyone still wants to chime in, I'll be a little more specific - I'm looking to build a 26'' rear wheel for my commuter bike, for use every day in sometimes foul weather, but only on roads and some gravel. I.e. doesn't have to be super strong (I weigh 58 kgs) or exceptionally fast but I value low maintenance, longevity and smooth running very highly. I have the Gerd Schraner book, btw, very useful! And I have access to a truing stand and a tensiometer.