Reply With Quote
Most fitters don't put much stock in whether the bars obscure the hub. There are much better things to look for to figure out whether the bike fits or doesn't fit you, pain and discomfort being the most obvious. And don't use saddle setback to alter your reach. You saddle's fore/aft position is a function of both the position of your knees relative to the pedals and your balance relative to the bottom bracket. Once you get that, along with saddle height, adjusted correctly, then you can start to fine tune your upper body via the bars, stem and spacers.
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 4 of 4
-
06-21-2009, 05:00 PM #1
Fat bottomed girl
- Join Date
- Apr 2009
- Location
- Illinois
- Posts
- 191
Road Bike Fit...Seeing the Hub While on the Hoods
To disable ads, please log-in.
So I have this new project bike and I have noticed that when I am on it, with my hands on the hoods, I think I am way too far over the handlebars. I look down and I totally can see the hub, and I think the handlebars are supposed to block the hub if the thing is fitting properly, right? I have my saddle as far back as it can go, so can I adjust/change out the stem or something to change this?
And this is the first road bike I have been on in years and years and years. I usually ride a hybrid, so I don't know all that much about road bikes.
TIA!"A bicycle does get you there and more. And there is always the thin edge of danger to keep you alert and comfortably apprehensive. Dogs become dogs again and snap at your raincoat; potholes become personal. And getting there is all the fun."
-
06-21-2009, 05:30 PM #2
Meow!
- Join Date
- Sep 2006
- Location
- Central Indiana
- Posts
- 6,034
Live with intention. Walk to the edge. Listen hard. Practice wellness. Play with abandon. Laugh. Choose with no regret. Continue to learn. Appreciate your friends. Do what you love. Live as if this is all there is.
--Mary Anne Radmacher
-
06-22-2009, 04:26 AM #3
Corgi Prime
- Join Date
- Nov 2006
- Location
- Memphis, TN
- Posts
- 996
I'm with Indy... that is just sort of a basic starting point, kinda like "knee over the pedal spindle." What's best for you may not be in that exact spot, but it's probably gonna be close.
-
06-22-2009, 07:42 AM #4
Registered User
- Join Date
- Oct 2008
- Posts
- 355
The obscure-the-hub-with-the-bars approach to fit depends entirely on bicycles having identical head tube angle and fork offset throughout the whole range of sizes, which any modern quality bicycle will NOT have. It also depends on a very uncreative fitting technique. Especially smaller frames you are likely to see the hub in front of the handlebar.
