Where does this go?

[Duck on Wheels]

I'm so glad I read this thread! I just reassembled my bike after my ride in California and trip back to Norway. I have the same (or at least a very similar) ring thingy left over. Could not work out where it went, but there's definitely something off with the steering. Now I can see if my ring thingy is the same as yours and if that solves the problem. What a relief that would be!

[sundial]

Is there a positive or negative sign marked on either the connectors or the prongs?

No, but there's a lightning bolt just above the front male prong thing, on the side. Me thinks I need to plug in one thing there. Now for the other one....

Now I can see if my ring thingy is the same as yours and if that solves the problem.

Isn't this fun? LOL! I hope you find the spot for the missing ring thingy.

[maillotpois]

My Schmidt hub has the same sort of connectors. If it works, you have matched things up correctly. It's not going to short out.

[sundial]

THANK YOU!!

I was worried I was going to mess it up.

I was trying to reconnect stuff and I did just like wackyjacky said and then I spotted the hidden connector clear in the back. Then I started second guessing myself.

Ok, pulled up the spec sheet and it looks like I can hook the second connecter to either the middle or rear thing. Anyone that doesn't have brain fog, tell me if it's so. Scroll down 3/4 page to the Lumotec N2 stuff.

http://www.bumm.de/docu/download/170e.pdf

It's German engineering at it's finest. You know the Germans, they make great stuff.

[wackyjacky1]

Hard to tell from your pic: Are both wires black, or is there one black wire, and one black & white wire? From the diagram for the N (not N2), the black & white one would be the ground ("mass" or "earth" they call it) and would plug onto the middle prong. The solid black wire would be for the current and would plug onto the top (lightning bolt) prong.

But it sounds to me like you've got it hooked up correctly.

[sundial]

Wacky, both wires are black so I guess it's fine to plug it into the first and second prongs. At least that's what it looks like to me. Thanks for taking a peek at the diagram.