New bike affordability

[wnyrider]

After lots of riding on my Trek 830 which is cro-moly, I've decided to start looking for a more comfortable frame material, as my current frame is aluminum.

I am confused. Are you referring to one and the same bicycle?

[Zen]

I couldn't find a listing for an 830, this was the closest thing I could find
http://www.trekbikes.com/us/en/bikes...archive/820wsd

[aicabsolut]

I am confused. Are you referring to one and the same bicycle?

+1...isn't your bike mostly steel?

[Ana]

I am confused. Are you referring to one and the same bicycle?

My apologies for the ambiguity.

I edited my original post: I'm considering an upgrade from my aluminum road frame (LeMond Tourmalet) and my steel hardtail mountain bike commuter (Trek 830--it is a very old Trek model so you probably won't find it in the Trek archives) has made me realize I might be more comfortable on steel or titanium.

My words just kind of got mixed up in my original post

[VeloVT]

Given the current climate, if you have to ask this question, my guidance would be to go with the piggy bank method instead of the credit card method. Find some monthly expense you can live without -- maybe cable, maybe the two latte a day habit -- and put that money into a sock under your mattress.

[Ana]

Given the current climate, if you have to ask this question, my guidance would be to go with the piggy bank method instead of the credit card method. Find some monthly expense you can live without -- maybe cable, maybe the two latte a day habit -- and put that money into a sock under your mattress.

Thank you for the advice. I would never purchase the bike until I had the funds It's one of the reasons I don't have a bike now I think TE perpetuates bike lust

I might start a separate savings account for it and put the money others would use for coffee and other expenses I do not have.

I'm not sure I would put anything on my credit card I couldn't pay off at the end of the month, especially with the current financial climate

For now, I'm just dreaming

[hilldweller]

Would you sell your current bike(s) to offset part of the cost? Anything else you could sell - unused equipment for other sports etc?

I basically just decided I wanted and deserved a bike, having thought about it for a couple of years. I looked briefly at new ones and decided the ones I wanted were out of my price range, so bought second-hand. That obviously has its pitfalls but I've got a better bike than if I'd bought new, and if I want/need to sell it for some reason I probably won't lose as much as on a new bike.

Oh, and the actual amount was determined by the size of my tax bill, which turned out to be less than the amount I'd put away to cover it. The leftover money paid for the bike

[indysteel]

Ana, I'd say your piggy bank approach is the best. In the meantime, I'd just start doing your research. There aren't as many off-the-rack options in ti and steel, but there any number of really great builders who could build your dream bike, perhaps for less than you think (especially if you go with steel).

I just got a new (ti) bike of my own. Like you, I saved for it. It was still hard to swallow the cost, but I'm pretty sure it will be worth it. I pulled the trigger when I felt reasonably sure I had enough extra money that I wouldn't miss the money too terribly.

[Ana]

Would you sell your current bike(s) to offset part of the cost? Anything else you could sell - unused equipment for other sports etc?

Yes, I would sell my LeMond, as the new bike would be its replacement. Unfortunately, I don't think it would offset the cost that much to sell it in comparison to the potential bike.

I would keep my Trek 830 because I love it to death The fit is very good, it's comfortable and I have lots of neat accessories on it One of the perks is that I can ride it and lock it outside without having to worry about it

As for selling other things...I don't really have much clutter. I usually sell/give away stuff I do not need The hobbies I do have are few and relatively inexpensive--cycling is probably the most extravagant one

I would also like to try kayaking and mountain biking (list is still in progress) but those will have to wait for now I am very satisfied with cycling for the time being

[ilima]

As far as titanium goes, it is an awesome material. I sold an aluminum bike to help defray the costs of my Merlin. That being said, I did have a mental block about paying more than about $3K.

One nice thing about Ti for someone looking to buy is that resale prices are low.

Backcountry outlet also has some Merlin models it's getting rid of. The prices are good but not great considering they are being sold on an outlet site.

[lunacycles]

Before anything I say, it should be clear that I am biased due to the nature of my business. But my intent in posting isn't to gain business, but to offer some wisdom gleaned from making custom steel bikes these last 14 years.

When i first started doing this (framebuilding), I really wanted to get into titanium as a material for framebuilding. As I researched more and more it became clear, that on the custom end of things, there isn't much to be gained from building with titanium. It is much more expensive on the cost-end for a small-volume builder, there isn't a great offering of tubing for the custom builder, more tooling is required, as well as being subject to hazards I am not willing to be subject to (e.g., obsessively cleaning tubes with acetone before they are welded).

Also, again on the custom side, I found that I can create steel frames that match the weight and ride quality of titanium. Steel tubing is available in so many more tubing thicknesses and configurations than titanium, and for the small/light rider (for whom I build most bikes), that is important.

A Trek 830 is steel, but it is the kind of steel that does not suit a lighter rider well, because it is heavy and thick walled. This means, if you are not big and heavy enough, it will feel fairly dead and not offer a particularly plush ride. A custom builder can custom "tune" a steel tubeset to fit the rider's size, weight, and intended usage. I built an all-steel frame last summer that weighed 2.6 lbs (most titanium frames come in around the 3lb mark). This shocked me, but made me realize the incredible versatility and benefits of steel. Stock steel frames and bicycles, regardless of the manufacturer, will be more "burly" (i.e., heavier and stiffer) than anything custom, for cost and liability reasons.

Stock titanium frames/bikes can work very well for the small and light rider (assuming they fit well), and even overbuilt ones will probably ride quite nicely for the smaller rider, due to the material properties of titanium. It is a less "dense" material than titanium and more "flexy"--often a good thing if you are relatively light. However, as has been noted, even stock titanium frames/bikes exceed the price of identical and often better fitting custom steel bikes.

Finally, aluminum is usually a poor choice for smaller/lighter riders, especially stock aluminum (and there are very few custom builders who work with aluminum, but that is another topic). The reason it is not great is it tends to be very oversized in diameter, and the triangles on a small frame become very small, enhancing the rigidity of the frame and tubeset. This makes the bike, particularly in small frame sizes, usually exceedlingly "stiff" and a harsh ride. The reason aluminum is so popular for stock bicycles has to do with economics much more than it being the ideal or proper material for all bikes.