Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Page 1 of 2 12 LastLast
Results 1 to 15 of 26
  1. #1
    Join Date
    Aug 2005
    Location
    Maryland
    Posts
    29

    Small hands and hoods

    To disable ads, please log-in.

    Thank you all for making it possible to ask a question from my base of complete ignorance. Please forgive me if I’ve missed it, but I’ve searched all of the threads without finding an answer that seems to fit. I’m 57 and coming back to a bike after 25 years. I’ve just bought a Trek 45-cm 1000C WSD, fitted by a well-respected LBS guy. He says he’s flummoxed by my problem, but realizes he’s probably had more than one bike returned by a woman (especially) in the same situation.

    I have small hands (6.5 in. wrist to end of middle finger, 5.5 in. tip of outstretched thumb to outer hand edge, if that’s important), but not particularly weak ones. Although I can brake, I can’t reach around the hood to grip the brake lever firmly, and I can’t easily shift gears (which requires an inward push with my middle finger on the brake lever). It’s as if the hood itself is just too big around for my hand. The LBS fitter says he can see the problem—I have to turn my whole wrist out to shift. The combination makes my hands hurt even riding around the parking lot. I can imagine what it would feel like after a couple of hours. The LBS suggests switching out the dropped handlebar to a flat bar to change the shift mechanism. This will obviously limit my position options and probably efficiency. I’m not a snob about the look of the thing.

    It just doesn’t seem like the width of the handle bars, and the bike itself seems the right size. Has anyone else had to cope with this? How did you deal with it? Is it really the hood, and if so is there a small or WSD solution? Or is it my inexperience, and would stretching exercises (for which thanks to the forum) help? Thanks for any help you can provide.

  2. #2
    Join Date
    Apr 2005
    Location
    Asheville, NC
    Posts
    680
    kmoty...i do have a suggestion but because i am such a dunce i do not know the make & model of my bars & brakes which are WSD and for small hands

    i have an e-mail out to my personal mechanic (my fiancee) to retrieve the info and i will pass it on as soon as i get it...
    I am a nobody; nobody is perfect, and therefore I am perfect.

  3. #3
    Join Date
    Aug 2005
    Location
    Maryland
    Posts
    29

    small hands and hoods

    Thanks. I'll look forward to hearing more.

    Karen

  4. #4
    Join Date
    Apr 2005
    Location
    Asheville, NC
    Posts
    680
    Shimano Ultegra for small hands shifters
    handle bars Cinelli.. but there are lots of small ones out there.

    I was fitted before i even decided which bike to get...the lbs owner is VERY knowledgable (his #1 employee's wife is tiny) *besides...this is the 4th high-end bike my fiancee has purchased from him!!!! i would hope you LBS could order small parts for you...it is sooooo important for your bike to fit you!!!! if you need more info i will be happy to add to this tonight when i can actually look at the components and give you model #"s
    I am a nobody; nobody is perfect, and therefore I am perfect.

  5. #5
    Join Date
    Aug 2005
    Location
    Maryland
    Posts
    29

    small hands...

    I'm sure the LBS can order small parts and adapt them, just might need some direction. The owner's wife is past her due date, and I know he wasn't completely focused (as he acknowledged). Thanks once more.

    Karen

  6. #6
    Join Date
    Jul 2005
    Location
    Seattle/Bothell
    Posts
    38

    I hate Shimano... for road bikes

    I have Shimano on my mountain bike and LOVE it!

    I have tiny hands. Nothing worked well when it came to Shimano for me, and I was not about to put a straight bar on my road bike...

    I am a total Campagnolo girl... it is worth the extra $$$ to have the ability to grab my brakes with my hands firmly gripping the bar...

    There is another difference in the comfort factor. If you examine both shifters closely, you'll find that the pivot point for the braking mechanism is mounted closer to where the cable is pulled on the Campagnolo. This means that when you are braking from the top of the hoods, it requires less leverage. I consider this a comfort issue because in the Northwest, if you're not climbing, you're braking. The leverage advantage to the Campagnolo means less work for your hands, so it's more comfortable.

    The last thing that I would say about comfort is to compare the front shifting of each make. The Shimano requires that the brake lever be pushed sideways a considerable amount before the shift is made. The Campagnolo can be pushed a few clicks, then returned to resting, and then a few more to make a shift. This becomes a comfort issue if you have smaller hands than the average male that the shifters were all designed for. For people with smaller hands or shorter fingers, the Campagnolo is usually the preferred choice.

  7. #7
    Join Date
    Dec 2004
    Location
    Utah, Gateway to Nevada, not to be confused with Idaho
    Posts
    1,872
    I just measured my hands and they are nearly the same size as yours.

    I use the Shimano short reach levers and have the itty bitty handlebars and have never had an issue.

    That being said, my buddy Steph who is itty bitty-er than me uses Campy.

    So I think you could go either way...hopefully you'd be able to try both and compare them.

  8. #8
    Join Date
    Aug 2005
    Location
    Maryland
    Posts
    29

    Small hands

    Thanks. I'm collecting this useful input and will take it to the LBS for a conversation. I'm also learning how the forum apps work, so ask forgiveness if I get it wrong. No need to reply (NNTR for me).

    Karen

  9. #9
    Join Date
    Jul 2004
    Posts
    2,609
    I agree with the Campy fans. I have ridden both, and I'm so much more comfortable with Campy. The hoods seem to be shaped more for my hands, and are much easier to ride for long distances.

  10. #10
    Join Date
    Jun 2005
    Posts
    160
    Another Campy girl here!

    I don't care if the LBS guys joke about my "crazy italian" components-shimano isn't comfortable for my hands.

  11. #11
    Join Date
    Jul 2004
    Location
    Southern California
    Posts
    526
    Another ditto for Campy. I have very small, and weak, hands. I can't even grip the hoods of my hubby's Shimano levers but my Campys are a snap. Just got a new bike with Campy because I liked my old ones so much.

  12. #12
    Join Date
    Sep 2004
    Location
    Albuquerque, NM
    Posts
    3,099
    Quote Originally Posted by kmoty
    Thanks. I'm collecting this useful input and will take it to the LBS for a conversation. I'm also learning how the forum apps work, so ask forgiveness if I get it wrong. No need to reply (NNTR for me).

    Karen

    no apologies hun - we were all new here once!! as for taking the info to your LBS - just be sure you tell them it came from the ladies on the TE board! THAT should score big bonus points for you!!


    I'm JUST KIDDING!!! we have this running joke about some of us going into our LBS and telling them "well on the board......." and having them roll their eyes!!
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, champagne in one hand, strawberries in the other, body thoroughly used up, totally worn out and screaming: "Yeah Baby! What a Ride!"

  13. #13
    Join Date
    Nov 2004
    Posts
    111

    Another one in the Campy camp

    My hands are a bit smaller than yours. Of all the bikes I've tried, my Campy shifters have been the only ones that fit me, though I did not get to try Shimano for little hands.
    Plays in dirt!

  14. #14
    Join Date
    Jul 2003
    Location
    Traveling Nomad
    Posts
    6,763
    My hands aren't exceptionally small for a woman (size 7 gloves), but I definitely prefer Campy Ergopower shifting to Shimano STI. Bar-ends are also nice for those with small hands. With those, size doesn't matter. However, there's still the braking issue there.

    But, if you have a Shimano bike, the Campy option would be way too pricy - I'd just try to find the Ultegra short-reach levers as others have suggested.

    Good luck!

    Emily
    Emily

    2011 Jamis Dakar XC "Toto" - Selle Italia Ldy Gel Flow
    2007 Trek Pilot 5.0 WSD "Gloria" - Selle Italia Diva Gel Flow
    2004 Bike Friday Petite Pocket Crusoe - Selle Italia Diva Gel Flow

  15. #15
    Join Date
    Aug 2005
    Location
    Maryland
    Posts
    29

    small hands and hoods

    Thanks to everyone for the good advice. After trying the Shimano short-reach and the Campagnolo levers I ordered the Campagnolos. Sort of like fitting a Volkswagon beetle with a Ferrari engine, I suppose, but there was no comparison for comfort and consequent safety. For anyone else faced with this problem, in order to retrofit the Campagnolo to a Trek bike, you need to change out the rear gears from 8 to 9- or 10-speed, and that might require additional parts changes (e.g. the rear wheel). My LBS will do the best they can to keep the cost down and think it will be $225-$250 if they don’t have to change out the wheel (remembering I have a 45-cm bike).

    Karen

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •