Trainer Recommendations?

[Norse]

+1 for the Cyclops Fluid. I am going into the 5th winter of use for mine and never had problems. Fluid and roller trainers are better than magnetic because, my understanding is that, magnetics, like Life Cycles, keep spinning after you stop pedaling so they don't simulate the road very well.

Probably like everyone else, mine is set up in front of the TV and I have a small collection of Spinervals, Train Right videos and Bike-O-Vision scenery DVD's. Sometimes though, like this morning, I just turn the TV to the Dance music channel, turn up the volume and do an interval work-out.

Besides being on your own bike and doing the work-out you want to do, the other beauty of this is NOT having to get dressed to go to the gym, fighting for a bike and driving to and from. I wear beat-up old bike shorts that I would not wear in public and too tight sports' tank tops that I would not be caught dead outside our basement in. I love having the trainer.

[kie_fujo]

we have a bell motivator trainer that we got on amazon and it works great. it's under $100 too!

http://www.amazon.com/Bell-Motivator...6436812&sr=8-1

[GraysonKelly]

Okay,
I looked a whole bunch of trainers online. I don't get it. So I'm gonna ask here (I hope I'm not hijacking the thread).
1. Which type is not gonna wear down my tire?
2. If I'm on it (any type) for an hour or more is it gonna get so hot that it pops my tire? (I read reviews last night about that happening)
3. Do I need a tire prop?
4. What do I need to measure distance? (another bike computer to go on the back wheel or can I get my current computer put on the back?)
5. How do you change resistance? Why would the trainer come with a remote? I thought that you changed resistance by changing gears, is that wrong?
6. Do the trainers come with a list of compatible bikes? (You know, like how bike racks sometimes list which cars they will fit)
7. I want to be able to do interval stuff (speed...I guess like spinning and lots of resistance kind of simulating hills) I saw some trainer that have 3 levels of resistance I'm assuming that if I set the resistance high then I can aso change gears to make it harder. I'm still not sure how the resistance thing works anyway.
8. Will I damage my frame? Will stresses put on the bike from being staitionary gonna damage the frame? If so, should I use the trainer with my mtb or the road bike? i've got slick tires on the mountain bike right now.

Okay, I'm done.
Thanks,
Gray

[roadie gal]

1. They're all going to wear down your tire to some extent. You can get a "trainer" tire that will be more resistant to wear. They're generally heavy, so they're not great for riding outside, but they do save your good tires.

2. I've been on mine for up to 3 hours without a problem. The resistance area (fan area, whatever it's called) will get hot, but not so much the part that touches your tire.

3. Anything will work - a board, a phone book, etc. The prop is just more stable. You can get them for about $10.

4. Depends on your computer. It might be compatible with the back tire.

5. You do change resistance by changing gears. Many of the trainers also come with a dial or other way to also change the overall resistance. Generally you don't fiddle with that during a ride like you do with your gears. You set the trainer to a tension that works for you and then just leave it.

6. Almost all of them adjust enough to be compatible with mountain or road bikes.

7. I don't know the mechanism by which they increase or decrease resistance, but see #5 above.

8. I've seen multiple discussions on bike and tri sites about this. They all say that the trainer will NOT damage your frame and that there's actually more stress on the road than the trainer. You do want to use the skewer that comes with the trainer, though. They tend to be heavy steel that resists the torque better than the nice one that's probably on your bike.

I would suggest a fluid rather than a mag trainer. I've had both. The fluid gives a much more realistic road feel.

[mayanorange]

I have a cycleops fluid trainer and I like it. Yes, they all wear your tires eventually. You definitely need something under the front tire otherwise you feel like you're going downhill the whole time. I picked up a front tire block cheap, but before that, had a chunk of wood under there. The resistance on mine is adjusted with a knob- tighten it and it holds the wheel firmer and you have to pedal harder. Mostly I set it to what it recommended- 2 turns past when it touches the tire, then just shift to a different gear to increase the workload.

[Norse]

Save your good tires and use cheap or worn ones on the trainer. Because I sometimes use the trainer during the season, especially as a morning before work work-out, to save time I bought a used wheel with the same make of cassette as my "good" wheel and put the crappy stock tire that came with the bike on there and that's what I use.

[Irulan]

I picked up a a trainer specific tire for $5 at the LBS.

Where you will get frame damage is if you sweat a lot that drips on the frame and you don't clean it off.

I have a Kenetic fluid trainer that has a flywheel - as you increase cadence the resistance increases.

Just shift gears to maintain cadence/resistance.