That's a hilarious video!!
That's a hilarious video!!
My new non-farm blog: Finding Freedom
I had pedal-click once that was mis-diagnosed as BB noise. When my new BB started to make noise, I thought it would be the pedals, but it wasn't. I ended up tearing the crank/BB down, re-greasing everything, and STILL having a tick! What fixed it was tearing it down (again) and putting teflon tape on the BB threads. It's silent now.
Incidentally...it's back.
Taking the pedals off did remove the ticking, but not for very long. I could just keep taking them off and on again constantly, but I'm concerned about the safety of that idea. I'm sure at some point they wouldn't be tight enough or something, and I'd only learn that along the way. Plus that doesn't really seem like a good long-term solution.
Any thoughts?
It's probably not the part of the pedal axle that spins or screws onto the crank....it's the bearings INSIDE the pedal axle. Thus, greasing the outside spinning parts of the pedals is not going to really solve this.
You have to open the axle itself and clean/regrease the bearings. Or.....buy new pedals.
Lisa
My mountain dulcimer network...FOTMD.com...and my mountain dulcimer blog
My personal blog:My blog
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Why did taking the pedals off and putting them back on again make it go away?
How many miles do pedals usually last? I bought mine last July, and since then have put approximately 8,000 miles on them.
Maybe because some of the oil/lube you squirted on the outside spinning part seeped into the bearings and helped them temporarily?
I'm not 100% sure but I think that (like rollerskate bearings) the pedal bearings need grease which will not evaporate or leak out like thin lube or thin oil will.
My previous pedals had this issue after about 3,000 miles, on one pedal. Sholdn't have happened, but then it's not a perfect world.How many miles do pedals usually last? I bought mine last July, and since then have put approximately 8,000 miles on them.
I was lazy and ordered new pedals. But the old ticking one stills sits around waiting to be opened up and cleaned and greased. DH said he'd do it 'eventually'.
What kills me is that this a fairly common problem, and yet I keep hearing about LBS's that immediately have people change their bottom brackets first, without even checking the pedals. Why not check the easiest and least expensive possibility first?
Anyway, to me your symptoms sound like the inside pedal bearings.
Lisa
My mountain dulcimer network...FOTMD.com...and my mountain dulcimer blog
My personal blog:My blog
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I checked with my LBS and they said it's $70 to overhaul the pedals. (I don't feel like have enough experience to take them apart myself.)
But I called Crank Bros. and they'll overhaul them for free!I just have to ship them to Laguna Beach for repairs. Sign me up!
When they get there, my pedals will have nicer weather than I will.
Now please excuse me; I have to go hunt down an eggbeater pedal-sized box...