Quote Originally Posted by smilingcat View Post
Oh you may want to tear down the races. hubs front and rear and the bottom bracket and repack with grease. BB will need a special spline tool just for that BB. Hubs can be torn down with open ended box wrench. The rear cluster will have to be removed to get to the races and that too will require a spline tool. It'll be a good (several) weekened project for your DH

You probably should also check the wear in the head set.
Smilingcat, are you an old fart sewup user too? Yes, definitely repack the hub, bb, and headset. You'll need a set of cone wrenches (13 mm and 15 mm) to do the hubs. Freewheel tools are specific to the freewheel brand (Regina, SunTour, Atom, Malliard) and some brands used more than one style over time. Raleigh bb's didn't use spline tools, either a narrow flat that fit a large wrench or holes that fit a pin spanner, and a lockring tool. The headset may require a 32 mm thin headset wrench along with a large crescent wrench. And I don't consider this a project for uforgot's DH.