When you change this one, try putting the tube in some water. The air bubbles will show you if there is more than one puncture and will give you an idea of where to look on your tire.
Good luck!
V.
When you put the tube back in, put the logo of the tire where the stem hole is. This way, you have a reference point for the tube and the tire. In the future, when you get another flat, you will know where to look in the tire for an object by where the hole is in the tube. Or, if you know where the object is in the tire, you know where to look on the tube for the puncture.
This came in handy this last week for me. I had a thorn in the tire but could not find it and I did not feel anything on the inside of the tire. I found the hole in the tube and patched it then went back to the tire and looked in the area where the tube had been punctured. The thorn was slight and not very long. I had to push down on the tire to feel it. Had that same problem with a sliver of glass once too.
Changed the 2nd tire last night - the one I put on on the road - and found the leak. Up at the nozzle, there was a crack. DH tells me it is likely from my using the small hand pump and having nothing to support it as I pumped. I guess I need to put a hand behind it or a knee or something. Mystery solved.
When I read your first post I laughed out loud so hard. I did a 150 mile ride over 2 days and by the end, you would have thought I was a witch! Everything pissed me off! Yet I long to get out and do another long ride this weekend.
As for the tire changing thing, my bike shop guy told me to carry a cell phone instead of a tube. Guess I must look to stupid to be able to change a tire. Maybe I should have told him I change a lot more than that on my car, so I might be able to handle a bike tire! Ohwell, I had to laugh. Then I went to another bike store and got what I needed.![]()