Is there any certain type of pedals this happens on? My Look pedals are only 3 months old and I don't know where you would grease them. My DH had the clicking problem with Speedplays, but I am not sure where to start with my pedals.
Is there any certain type of pedals this happens on? My Look pedals are only 3 months old and I don't know where you would grease them. My DH had the clicking problem with Speedplays, but I am not sure where to start with my pedals.
Amanda
2011 Specialized Epic Comp 29er | Specialized Phenom | "Marie Laveau"
2007 Cannondale Synapse Carbon Road | Selle Italia Lady Gel Flow | "Miranda"
You don't have to be great to get started, but you do have to get started to be great. -Lee J. Colan
Chimes in with another non-bottom bracket click - I get a creak-click that sounds like someone dropping a ball bearing if I don't periodically reseat/tighten the quick release on my rear wheel. It was driving me bonkers. I had my LBS tighten the BB too - he did say one side (its and external BB) was a bit loose, but the creak remained until I tightened up that rear QR.
My husbands TT bike definitely has a loose BB - the sound it makes is a very loud snaping noise.
"Sharing the road means getting along, not getting ahead" - 1994 Washington State Driver's Guide
visit my flickr stream http://flic.kr/ps/MMu5N
Don't worry about feeling foolish trying to explain the BB clicks to a good wrench. The good ones ride bikes too and they know that mysterious clicks can come from that region or seem like it.
If you decide to take your bike in and have it looked at, take your cleats with you.
On the look pedals. There is a small rubber patch where the cleat contacts the pedal. Try some clear finger nail polish or duct tape on it. Sometimes that works. Also, there is so much plastic in contact with metal that creaks are pretty much inevitable. Replacing it when it starts to wear is the only real way to fix it... until the next time it wears down.
The contact surface of speedplays needs regular lubrication. Take a little oil and work it around the contact surface on the pedal.
re-cur-sion ri'-ker-shen n: see recursion
In addition to what BIAK suggested, I also found that just removing the pedal, cleaning up the threads (where it screws into the crank), regreasing them and then putting it back on cleared it up. So simple and yet so silly of me to not have checked! My pedals were only about 4 months old (look-type shimano ultegra) when it started. I actually thought that maybe they were defective since they still looked brand new...I was about to send them back to Shimano when DH suggested I try greasing them and putting them back on. I think that some grit or something must have gotten in the threads? It's been 5 months since I fixed it and I haven't heard a peep out of them.
My new non-farm blog: Finding Freedom
My LBS guy said that those clicks are hard to diagnose. I've got one...it's not loud but it's clattery and persistent. Toe clips generally don't click so I don't think that's itI think it'll keep until I take it in for its 5000 mile checkup ...
I just had the same thing, and indeed, took off the pedals, regreased the threads, and total silence.
My dh once had this weird creaking from his bike that he just could not diagnose. It turned out it was his seatpost... he finally clicked to the fact that the creaking went away when he stood up to pedal.![]()
Winter riding is much less about badassery and much more about bundle-uppery. - malkin
1995 Kona Cinder Cone commuterFrankenbike/Selle Italia SLR Lady Gel Flow
2008 white Nakamura Summit Custom mtb/Terry Falcon X
2000 Schwinn Fastback Comp road bike/Specialized Jett