How long did it take you to break in your Brooks?

[mimitabby]

Use the leather care product that is recommended with the saddle. use it as OFTEN as you like.
(I forget the name)
other people will post soon.

Bikerhen, a lot of the slippage goes away once the seat is properly adjusted.

[dex]

...and what type of oil.

Proofide
http://www.wallbike.com/content/proofide.html

[melissam]

I have to chime in here. I love my Brooks -- all three of them!

It all started last summer with a B17S for my Trek road bike, which I enjoyed so much that I got a B17 for my mountain bike. I gave someone a Team Pro S for Christmas, but they didn't like it, so I got them another saddle and put the Team Pro S on my Bianchi road bike. All of the Brooks felt good from the getgo, but felt broken-in around the 100 mile mark.

That said, I think my longest rides have been in the 50 mile range. I may not be quite as charmed with my Brooks after a century.

I should also mention that I bought all the saddles from Wallingford Bicycles (www.wallbike.com), and they were a pleasure to deal with.

Here's what I do for saddle maintenance program:

1. When I get the saddle, put Proofhide (the stuff recommended by Brooks) on the bottom and the top of the saddle. After a few hours, buff off the top of the saddle; no need to buff off the bottom of the saddle.

2. When the saddle is new, apply Proofhide to the top every week or so. Let it sit until it's not shiny, then buff it off. (It tends to loose the "shine" after an hour or so.)

3. After a few Proofhidings, it will stay shiny for several hours. At that point, I only Proofhide it every six months or so.

This maintenance program pretty much agrees with the literature that comes with the Brooks saddles.

You should also know that I live in Northern California, which as very mild temperatures -- not rainy or sun-baked.

I've also only owned my Brooks for the last year, so I can hardly vouch for the long term success of my maintenance program.

Oh, and about the slipperiness. I do recall noticing it at first, but it seemed go away after a few rides and some Proofhiding.

-- Melissa

[divingbiker]

I've probably got about 700 miles on my B68 since May, and I can't tell that it's "broken in" at all. It's comfy, but it's still hard as a rock and I don't see any indentations.

[chort]

Mimi - I think you are the Brooks queen!

Well, I just hope it gets a little more comfty even if it doesn't "break-in."

[BleeckerSt_Girl]

The Brooks saddle will never get "soft"- it will just slightly form to your sitbones, that's all.
Don't use oil on it. Use Proofhide like the makers recommend. Use it every few days 4 or 5 times on a brand new saddle, then once a month a couple more times, then maybe once every 3 or 4 months to help keep it water resistant.

I rode my first Brooks for 6 months before it seemed broken in. After a year I bought a new Brooks (different model) and I could ride it right off the bat without getting sore. Seems my REAR was sufficiently broken in already!

[KnottedYet]

I just bought my 2nd B67. It felt lovely from the start (just like my 1st B67 which I bought last year) but I could definitely tell the difference between the new and the older "broken in".

My 1 year old B67 is still "hard" leather, but boy is it customized to my lopsided pelvis!

And btw, I follow the same Proofhide schedule that Mimi does. That Proofhide is good stuff.

[IFjane]

I've probably got about 700 miles on my B68 since May, and I can't tell that it's "broken in" at all. It's comfy, but it's still hard as a rock and I don't see any indentations.

From one who has never ridden on a Brooks, maybe it's not the saddle that gets broken-in??? "I'll leave now," IFjane says as she tiptoes out of the forum...