terry precision

[surgtech1956]

KnottedYet, I am so embarrassed. I really am a newbie. I was putting the book so that it gave me clearance. Now I know what you were talking about measuring. So I would say its 29 1/2".

[Triskeliongirl]

If your cycling inseam is 29.5 then you definitely need the 17.5" frame for standover clearance. I agree with Emily, the cockpit may be too short, but that will depend on the lengths of your femurs and arms, and how aggresive a position you want to assume on the bike, none of which we know. BUT, putting a longer stem on is easy and relatively inexpensive (~$29, nitto technomic comes in a lot of sizes to dial in fit http://www.lickbike.com/productpage.asp?PART_NUM_SUB='1173-10'), and will only improve handling as I think the stems on those bikes as supplied are too short (I always put longer ones on) so again given the apparent good condition and good price, I think its a good bet. Again, what about my suggestion of driving out to test ride prior to bidding?

[KnottedYet]

29.5 bicycling inseam meets 27.5 standover top-tube.

I'd say 2 inches of clearance sounds pretty fine. Especially at that price. For a STEEL TERRY! (I have less than that on my Surly and Waterford, but I have a very long torso and long arms and the geometry works for me) If you need a bit longer reach once you get the bike, it's not a difficult thing to get a longer reach stem.

And at our age (eh-hem) being a little more upright (slightly shorter reach frame will do that) isn't a bad thing.

I'd still get that Terry. (except that it's too small for me and 2,000 miles away... )

[surgtech1956]

My hybrid frame is 15" and seems fine - I think sometimes I'm in between sizes, my mtn bike was a 17.5 and seemed too big. I'm going to try the adjustment on my saddle(thanks KnottedYet). I can't go before the auction ends and look at the bike. I guess if I win it and it doesn't work out - I can just resell it on Ebay. Thanks girls, I'll keep you posted.

[KnottedYet]

If you get it and can't make it work for you, I'd sell it here on TE or on the Terry site before Ebay. Sell it to an audience who knows what it's really worth! (If I didn't already have 2 steel bikes and weren't 2,000 miles away I'd happily pay up to $400 for that Terry. $500 if I was madly in love with it.)

Don't get too caught up comparing size numbers between a hybrid, a mtb, and a road bike. They are all going to have unique personalities and unique fits regardless of numbers.

Just buy the damm bike!!!

[Triskeliongirl]

[QUOTE=surgtech1956;208506]My hybrid frame is 15" and seems fine - I think sometimes I'm in between sizes, my mtn bike was a 17.5 and seemed too big. QUOTE]

The mountain bike may have been too big cuz the top tube was too long. An advantage of the small front wheel is that it will have a more proportionally sized top tube. I think you can't go wrong on it. If it really doesn't fit you can probably make money selling it either here on TE or at the terry website.

[surgtech1956]

Didn't win the auction. The Precision sold for $380. I'm sure its worth it. I'm watching a few bikes. Terry must not be that popular of a bike?? Thanks for all your advice and info. I really appreciate it.

[KnottedYet]

Terry is a very popular bike among women who know bikes. Georgena Terry started the entire "WSD" wave. And she is a VERY cool chickie, riding like a demoness even with one leg in braces. (I think it was polio, but I could be wrong on that.)

You know those "cut out" saddles everyone talks about? (guess who?)

It's very sad you didn't win that Terry.

Here's some info about Georgena Terry.
http://www.engr.uiuc.edu/communicati.../blowtorch.htm

Listen to the "Queen of Cycling" herself:
http://www.npr.org/templates/story/s...toryId=6577627

Georgena Terry is number 19 on this list:
http://www.bicyclenewswire.com/index...&cid=46&id=132

This is an old article, but it's good. You'll note that Prestige Cycles in CLINTON TOWNSHIP MICHIGAN is mentioned. If you have any questions about Terry bikes, they might be a good resource, and they aren't too far from you.
http://archive.southcoasttoday.com/d...6/c01li096.htm

Here's a little something from Team Estrogen:
http://www.teamestrogen.com/se_terry.html

I have admired Georgena Terry for years. She is one of my heroes. Back in the old days I used to save her catalogs and read them over and over again.

[surgtech1956]

KnottedYet - Thank you so much for the links. OMG she is such an amazing woman. I had no idea who she was. She is like the 'martha stewart of women's bicycle'. I 'googled' her too - I liked the part that her employees are 90% women and the men are in the warehouse lifting heavy boxes.