Body Armour

[wavedancer]

Anyone who has the Rally shin guards, would you be willing to take some measurements off them? I have wicked short legs, 13" from mid patella to the ankle. I got a pair for my BF (XL) and I really like the way they wrap around and hug your leg. I have only seen a size medium, not small, and they don't give any actual measurements. Pebble, Tattiefritter: what size do you have?

Thanks!
Linda

[Pebble]

Mine are medium, have worn them on a few rides now (probably about 5 one to two hour rides) and they're nice and comfy. I did get some rubbing from the stitching on the top inside corner, but it seems to have gone away now so just a wear in issue I guess. I do lots of pedalling - no big dh sections in this town!

Some measurements as requested:

My height 169cm
Guard length from botoom of pad to top of lower shell 29cm (11.42")
Lower hard shell lenght 26.5cm (10.43")
Bottom to top (overall lenght including knee shell and bottom to top of padding) about 52cm (20.47")
Bottom of knee shell to top of top padding 21.5cm (8.46")

Leg bent: my ankle to top of knee cap is about 40cm (15.75") - measure along front of leg
Inseam about 79cm (31")
Leg bent: floor to top of knee 50cm (19.68") - this one was measured along side of leg

Hope you can make sense of the above measurements and they help.

[wavedancer]

Hope you can make sense of the above measurements and they help.

Thank you so much! Yes the measurements are very helpful and confirm what I thought: My legs are too short They list a size small on the packaging, but I have not seen them offered on any of the online sites that sell them. I have sent off an email to see if they are in fact making them in a small.

I did get a pair of the Rockgardn pads in a small, but they don't have that snug wrap-around feeling and I am afraid they may be more prone to chafing and moving around. I may give them a try while pedaling on my trainer to see if there are any potential chafing issues.

[Pebble]

I've heard a few recommendations for Rockgardn armour from female mountain bikers. If you already have a set then give them a go.

I have founds chafing is mostly to do with stitching, and with the race face pads the first ride was great, 2nd ride was a longer one (2.5hours or something) and the rubbing developed, a ride or two after that & all was fine again - I have found havint the top straps pretty tight works best.

Interested to know how you go with the rockgardn pads though. If you can, go out for a 30min to 1hr ride with them, if they're fine then you can try a longer ride. But going for up to an hour if there's any real bad chafing you'll make it home before it gets too bad.

The place where I purhcased mine seems to sell the Small size: (it's in Australia though)

http://www.phantomcycles.com.au/prod...7&cat=0&page=2

[tattiefritter]

Anyone who has the Rally shin guards, would you be willing to take some measurements off them? I have wicked short legs, 13" from mid patella to the ankle. I got a pair for my BF (XL) and I really like the way they wrap around and hug your leg. I have only seen a size medium, not small, and they don't give any actual measurements. Pebble, Tattiefritter: what size do you have?

Thanks!
Linda

I have small as I'm a shortie but its the newer FR2 pads I have not the FR, the FR only went down to a medium. I got the from ChainReactionCycles here in the UK. The smalls are basically the mediums with the bottom plastic cut off, hopefully you can get an idea from this pic here:

http://www.jeznewsome.pwp.blueyonder.../target47.html

A link to the CRC site for reference:

http://www.chainreactioncycles.com/M...?ModelID=11141

The pads are at home but I can rescue them from the back of the wardrobe and give you the measurements of them if you like. I'm 5ft 4 (about 163 cm) with a 30" inside leg (I think)

[wavedancer]

Great Picture!

I contacted Race Face and they said the small shin plate is 10". It seems like the knee guard and padding are probably the same in all sizes. I might JUST fit the smalls. (I have a 28" inseam). I will probably give the Rockgardn's a go for now. They are actually made for motocross, but the shin guards are shorter, though they are not as form-fitting as the FR.

[tattiefritter]

Hi Wavedancer, I must admit the Small FR2 only just fit my shin lengthwise, the bottom of the padding sits right on top of my shoe (stops them sliding down though), I'm not sure what length my shin is though but I have slightly longer legs than you.

That pink armour looks wild though!

[snowtulip]

Sandy,
The dainese jackets work very well, a bit pricey, but if you're going to be pushing the envelope it's well worth it.

Hubby dh races and originally had an Azonic jacket, broke his ribs on a race in AZ and went with Dainese after that because of pad placement and overall comfort.

Have fun with it, there's a few videos (dirt divas) that show some women freeriding. If you're ever in CO in the summer, there's a freeride/dh event in Silverton that a few pro women seem to attend. It's great seeing what they can do and aspiring to be able to do some of that.

Enjoy!