Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17
  1. #16
    Join Date
    Dec 2003
    Location
    Folsom CA
    Posts
    5,667

    To disable ads, please log-in.

    show-off

  2. #17
    Join Date
    Jul 2006
    Location
    Riding my Luna & Rivendell in the Hudson Valley, NY
    Posts
    8,411
    Quote Originally Posted by Veronica
    So did you replace it with a Rivendell lugged stem?
    V.
    No Veronica, I didn't. Those lugged Nitto stems only come as short as an 8cm (my original stem was 9cm), and I needed a 5cm if I also wanted move my seat back to where it should be, in the middle area of the rails (which I did). Total handlebar position difference I wound up with was 3cm back after moving my seat back too.

    I don't think I'd want to spend $200 on that lugged stem- especially when Rivendell sort of admits they are not as perfectly made as thier own frames, they say: "It is hand made and it shows. If you look closely you can see the brazing material around the edges of the lug. This is not a bad thing it just adds to the character. Each one is unique and takes a long time to make. To make a lug stem as perfect as our Rivendell frames it would easily cost twice or three times as much." (You mean like $500 for a stem??? I'd rather buy a new bike wardrobe!)

    My bike feels great now with the new stem I put on however...looks just like the one that came on the bike but shorter. Went for a 15 mile ride yesterday with the new stem.
    I love the slightly tighter steering feel to my front end with the 700c tires. I had no problem at all standing up to muscle up steep hills. And as I mentioned in another thread, I set a personal speed record downhill at 36mph yesterday, -partly because I can now go down in the handlebar drops comfortably, which I couldn't do at ALL before, had to stay on the hoods downhill. I can also now reach my bar end shifters more easily.

    As Emily brings up though, there are multiple factors to take into account. Aside from everyone's body being differently proportioned to begin with, there is frame geometry, wheel size, handlebar width and height, seat and leg position, upright or bent down body position...I guess limitless factors which can come into play when adjusting one's biking position. I also think that this stuff becomes more important if one wants to ride with more specialized purposes (long distance touring, racing, centuries, off-road, etc), rather than just riding around town or to the corner store.
    Lisa
    My mountain dulcimer network...FOTMD.com...and my mountain dulcimer blog
    My personal blog:My blog
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •