Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 15 of 61

Hybrid View

  1. #1
    Join Date
    Sep 2001
    Location
    Lakewood, Co
    Posts
    1,061
    I raised my handlebars 4 cm. I didn't want to be upright just a good neutral postion. 4 cm was a lot which is why it was so hard to adjust. Once my body adjusted the change was comfortable and I was happy. I remember thinking that I made a mistake in making the changes.

    MimiTabby, if there is a significant difference in body position and fit between your old bike and your new bike you will notice it. You have to train your body to the new position.

    That's why fitters recommend making changes in small increments.

  2. #2
    Join Date
    Apr 2006
    Location
    Seattle
    Posts
    8,548
    Kathi and FarrellCollie
    thanks for more good advice. I like your gadget, but i don't think i'm going to try it, after all i have heard, i am afraid of raising the bars any higher! I will work on getting used to it
    and shoulders relaxed, elbows bent...
    thanks all!

    I feel like there's hope now
    Mimi Team TE BIANCHISTA
    for six tanks of gas you could have bought a bike.

  3. #3
    Join Date
    Jan 2006
    Location
    Pacific Northwest
    Posts
    3,436
    Aside from getting together soon, mimitabby, so you can try my Bianchi Eros Donna, and of course, trying all the above suggestions....I would honestly recommend doing a little test-riding at an LBS that has some bikes in a slightly smaller size than the Veloce, and some WSD bikes for sure. You would then have a better idea re whether there is a bike out there that fits you noticeably better, and whether it's worth pursuing that. I honestly believe that a bike that fits well feels that way.

  4. #4
    Join Date
    Sep 2001
    Location
    Lakewood, Co
    Posts
    1,061
    I would think that the woman who did the fitting would tell you that the bike was too big. You spent a lot of money making those changes and if the bike was that far off she should have been honest with you and recommended a different solution.

    When I had my fitting on my Aegis I went to a Serotta trained fitter. They have a bike called a size cycle that can be adjusted to your dimensions. My fitter set me up on it before I made the decision to change my fork. That way I had an idea of what the changes would be like.

  5. #5
    Join Date
    Feb 2006
    Posts
    112
    Assuming the seat is in the correct position, you can get stems from 60 to 140 mm, and angles from -20 to +40, add spacers and there is a lot of movement. A pic would really help. A road bike requires a bit of a bent over position, you may need to balance the benefits of fast and quick with what feels best. Also gloves can make a difference in numb hands. Descente makes a glove that is padded for riding in the hoods. Good Luck.

  6. #6
    Join Date
    Sep 2001
    Location
    Lakewood, Co
    Posts
    1,061
    Last week I bought "Andy Pruitt's Complete Medical Guide for Cyclists" and he says to ride a "couple of hundred miles" before you make changes. But he also says that if you're not comfortable after that don't hesitate to go to the bike shop for adjustments.

  7. #7
    Join Date
    Apr 2006
    Location
    Seattle
    Posts
    8,548

    a photo



    here I am with my NEW Ibex wool knickers, they were perfect for the weather today...
    I hope this shot shows enough of me on my bike.
    Mimi Team TE BIANCHISTA
    for six tanks of gas you could have bought a bike.

  8. #8
    Join Date
    Apr 2006
    Location
    Seattle
    Posts
    8,548
    Quote Originally Posted by SR500
    Assuming the seat is in the correct position, you can get stems from 60 to 140 mm, and angles from -20 to +40, add spacers and there is a lot of movement. A pic would really help. A road bike requires a bit of a bent over position, you may need to balance the benefits of fast and quick with what feels best. Also gloves can make a difference in numb hands. Descente makes a glove that is padded for riding in the hoods. Good Luck.

    SR500 I wouldn't dream of riding without padded gloves.. My 25 year old son
    ripped his hand open when he fell without gloves. it was UGLY.

    I have already gotten all the stems I am going to get..


    Kathi,
    she kept saying that I looked comfortable!! after 5 minutes, how could she tell?
    it's funny; they do Serotta fits at that bike shop; why didn't i get one? I just got a bike fit.
    Mimi Team TE BIANCHISTA
    for six tanks of gas you could have bought a bike.

  9. #9
    Join Date
    Apr 2006
    Location
    I'm the only one allowed to whine
    Posts
    10,557
    Y'know Mimi, that looks pretty dang good. How it looks is certainly not related to how it feels, but it doesn't look terrible.

    Have you read any of Andy Pruitt's book? He goes over specific complaints and how to adjust your bike relative to the complaints vs. how a bike shop sets up an "ideal" bike.

    Today I loved a 50cm Jamis, when technically I should've been on a 53cm. But it was perfect for my neck problems and how they relate to my comfortable position on a bike.

    What looks good for a person with measurements like you might not be good for the real you.


    By the way: NICE knickers!!!!!!
    "If Americans want to live the American Dream, they should go to Denmark." - Richard Wilkinson

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •