Worried about my new bike - need reassurance

[IBrakeforPastry]

So I've taken my new Cannondale Synapse out for just a couple of short rides since I bought it last week. I've been riding a straight handlebar for nearly twenty years. Over the years I've had some neck and shoulder troubles and the straight bar seemed to be the way to go. Now, after physical therapy and training, things are much better and I wanted to try a drop bar bike again (and maybe go a little faster )

I went to a few LBS's and rode about 5 bikes. This one felt great while I rode around the neighborhood. Everyone says one of the good things about the drop bars is all the different possible hand positions to stay comfortable. Well, one of the problems I had yesterday was I was constantly changing positions. Nothing stayed comfortable for too long. All the other riders out yesterday seemed to look content and comfy and all I could think was "uh-oh". And then shortly after the ride, my neck started hurting.

I didn't ride far simply because I wanted to slowly get my body used to the new bike. So of course I'm worried. I'm sure there is probably a little tweaking to do with the adjustments, but what if I'm really not meant for a road bike? Any break-in suggestions?

[indysteel]

Get a professional fitting. I would bet that at least one of your local shops offers them.

[Dogmama]

+1 on professional fitting.

Also, remember that your neck has muscles that may need time to develop. In the meantime, here are a few tips I've learned.

Keep your shoulders down. You can do this by bringing your elbows in and think about pointing the inside of your elbows to the front. Try it - you can't lift your shoulders in this position. Lifting your shoulders stresses the neck.

Gently stretch your neck at stop signs, red lights, etc. Look all the way right, left and down (never up - you will smush the vertebrae together.) Do the "turtle" move - while looking forward, move your head backwards. This is the counter balance move to the neck up/extended position on a rode bike. Don't roll your head side to side, around, etc. According to my PT, this is really hard on the vertebrae.

Put your hands on the hoods or the tops of the handlebars, not the drops.

Hope that helps.

[Sky King]

Agreed, also find a fitter who is skilled at fitting for the type of riding you do. A shop that sells racing bikes is going to be more inclined to fit you in a racing position, aggressive with bars lower than your saddle. If you came to our shop we would fit you in more of a touring/commuter mode - ie higher position of handlebars, a little bigger bike.

Fitting.

And some fitters are much better than others. I called around, and went to different bike shops over a period of time until I found one I likes. And, in fact, he recommends the Guru Fit to anyone that has access.

[luvmyguys]

+1 on professional fitting.

Keep your shoulders down. You can do this by bringing your elbows in and think about pointing the inside of your elbows to the front. Try it - you can't lift your shoulders in this position. Lifting your shoulders stresses the neck.

Put your hands on the hoods or the tops of the handlebars, not the drops.

Hope that helps.

I'm in the midst of the same thing (riding a drop bar while trying not to give myself neck problems again). When I remember "shoulders down, elbows loose", I do much better. Pretty much my mantra through rides, which still aren't very long (but long enough to be fun ).

[velo]

I agree with the fitting(!!!) and keeping shoulders down, elbows in. Also, I'd add to make sure you are not locking your elbows ("elbows loose" as the pp said). If you do lock elbows, all of the road vibrations will travel up through your arms and into your neck. Keep your elbows slightly bent and fluid. That will also help to make sure you're not scrunching up your shoulders and adding additional neck strain. I think also, as core strength increases and your back and abdominal muscles are supporting your weight rather than your arms, you will see less discomfort. Ultimately, you want your core strength to be such that if someone were to just come along and pull your arms off the bars, you'd barely fall forward because your core strength is your main support on the bike. Being more aero can take time getting used to and some time building the muscles. It sounds like you're doing it right... slow and easy. Good luck and congrats on a new ride!!!

[emily_in_nc]

Get a fitting for sure, but also realize that it will take time to build strength in those muscles around your neck on a road bike. Whenever I haven't ridden for awhile, I always get a sore neck for the first couple of rides from holding my head up in a position I don't use in my daily life.