How to ride near trucks

[ny biker]

Good article. I didn't realize the blind spots were so large for tractor-trailers.

http://commuteorlando.com/wordpress/...-about-trucks/

Am curious to hear from those of you who also ride motorcycles -- did you already know this stuff?

[hebe]

Interesting article, thank you. There's been a lot of press and campaigning here as HGVs (heavy goods vehicules) are involved in a disproportionately high number of cyclist fatalities, particularly in cities.

My route to nursery involves a left turn immediately after an HGV training site, then another almost immediate left with a cement company dead ahead. I am always so very careful on that trip as there are always plenty of lorries around, I never undertake and I give parked lorries a very wide berth when passing, just in case they set off whilst I'm overtaking.

[marni]

I was taught to never pull up or ride to the right of a car or truck,anywhere near an intersection. Always take the lane behind the car or truck, Once you are through the intersection, pull over to the right as quickly and safely as possible into your usual riding position on the right hand 1/3 of the road.

If They are ahead of you, they can't turn into you or run into you. Even with a car, the right side is a blind side position. Make yourself visible and leave room for the sudden traffic maneuver from the car or truck ahead of you or behind you.

just sayin.

marni

[nscrbug]

I did learn much of what was in that article, from motorcycle riding/training. Whenever I'm out riding my motorcycle, I never linger alongside of a truck. I will pass as quickly as possible, to get out of the truck's blindspot. Obviously, on a bicycle...this situation is quite different. I always make a point of letting truck drivers SEE me. Most trucks that I've encountered on the roads while biking, have been very courteous.

[Trek420]

This is what may have happened to my cousin, a very experienced touring cyclist. I shudder to imagine it. Be careful, TE peeps.

http://forums.teamestrogen.com/showthread.php?t=11593

[OakLeaf]

I try not to get anywhere near a truck, when I'm on a bici. On a rare occasion when they're passing me and they're not going fast, I'll brake and make sure they complete their pass.

This is all stuff we learned in drivers' ed. I guess they don't have that any more. Lots of trucks around here even have great big stickers on them showing where the blind spots are.

When I'm in a motorized vehicle I'll pass a truck all at once or not at all. If another vehicle is lingering up next to them - which I totally cannot understand, it would scare me to death - but if they're doing that, I'll just hang behind the truck until they finally complete their pass, then I'll start and finish my pass in one maneuver.

But any time you're on two wheels it's a good idea to be looking for vehicles' blind spots and never linger in them. Not that they ever bother to look right in front of their eyes anyway, but if you can't see their eyes in their mirror, you know they can't see you.


I was reading some stuff where over in Europe (or maybe in the UK?) they're requiring trucks to have side panels between the wheels. I knew a guy who got run over by a flatbed while he was walking on the sidewalk and the truck was making a turn. The wheels were in the road but the flatbed came all the way to the wall next to the sidewalk and pinned the guy. Broke his hip, and he was an older guy, but amazingly and fortunately he made a full and quick recovery.

[PamNY]

Interesting and useful information. I don't deal with trucks much, but I cycle around buses all the time. I guess the blind spots would be similar?

[shootingstar]

In Toronto last year, a pregnant women cyclist was killed by a truck by being sideswiped. I believe she was dropping off another child at a daycare.

It made national news and got alot cycling advocates very concerned.