We had to remove an old hammock hook and eye from our honey locust tree which resulted in a 2" wide by about 5" deep hole. Any ideas on how/what to use to patch the hole??
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 8 of 8
Thread: How to patch a hole in a tree?
Hybrid View
-
04-04-2010, 03:55 PM #1
Grad School 1, Bike 0
- Join Date
- Feb 2007
- Location
- Southeast Idaho
- Posts
- 1,145
How to patch a hole in a tree?
-
04-04-2010, 03:58 PM #2
Don't whine
- Join Date
- Apr 2006
- Location
- I'm the only one allowed to whine
- Posts
- 10,557
I've seen arborists use some tarry stuff for trees. It dries into a good seal. Dunno what it is called. Maybe contact a nursery near you?
"If Americans want to live the American Dream, they should go to Denmark." - Richard Wilkinson
-
04-04-2010, 04:01 PM #3
Ain't Love a Surprise?
- Join Date
- Nov 2005
- Location
- Between the Blue Ridge and the Chesapeake Bay
- Posts
- 5,203
Contact your ag extension agency in your county. They can direct you to the appropriate information or person.
-
04-04-2010, 05:16 PM #4
f/k/a Mr. S.
- Join Date
- Dec 2006
- Location
- Blessed to be all over the place!
- Posts
- 3,433
I've heard the tarry stuff is bad for trees (at least after pruning...but possibly different for a deep hole)...
If you don't grow where you're planted, you'll never BLOOM - Will Rogers
-
04-05-2010, 07:27 AM #5
Registered User
- Join Date
- Dec 2005
- Location
- around Seattle, WA
- Posts
- 3,238
This is probably the best advice - treatment could depend on the species of tree, and location of the hole.
Originally Posted by tulip
Beth
-
04-05-2010, 08:21 AM #6
alimey
- Join Date
- Oct 2006
- Location
- London, UK
- Posts
- 102
Hi there
I would recommend doing nothing. Filling the hole w/ tarry stuff or painting it can trap bacteria in the hole (although it used to be a popular approach - along w/ concrete in big holes!!). The tree has an immune system which should isolate/encapsulate any problems associated with the hole. If the hole tends to fill with water, consider drilling another drain hole into it so it can dry out properly.
-
04-05-2010, 07:07 PM #7
Grad School 1, Bike 0
- Join Date
- Feb 2007
- Location
- Southeast Idaho
- Posts
- 1,145
Thanks for the replies. Apparently around here the tar is still the way to go. I purchased some in a spray can and sprayed it this afternoon. I am not too worried about bacteria b/c the average day temp is most likely too cold for bacteria and the hole was "open" for less than 24 hours. I honestly don't know if what I used was tar or not, there are no ingredients listed on the can - but - whatever it was came out black and sticky
Thanks for your replies!
Reply With Quote
