Bar end shifters vs integrated brake/shifters

[Catrin]

Are "brifters" integrated brake/shifters? This is my assumption. What is the advantage of bar end shifters over integrated brake/shifters? How do you switch between braking and shifting?

I am contemplating purchase of a Surly LHT in a couple of months and am looking at the stock components and considering if I want to change anything. The bar-end shifters do have me a little nervous (as it did for the Fargo). As a new rider that seems a long way to move my arm to shift.

So what are the advantages, or is it simply a different way to do the same thing? Of course, I have only ridden Stella, and she has mountain bike trigger shifters.

The more I look at the Surly, the more impressed I am by them and especially the Long Haul Trucker

[eofelis]

Yes, "brifters" are the integrated brakes/shifters. They are very nice and usually work very well. I have them on my road bikes.

Most people do not prefer them on touring bikes. On a touring bike you want something that is simple and can be fixed out on the road, if need be. If brifters happen to stop functioning out in the middle of nowhere, they lock up in one gear. You might not be able to fix them or find a replacement for them while on tour.

Bar end shifters work by pulling on the cable to the derailleur. It's simple and if it breaks, it's easy to fix. They will also work with any type of derailleur, brifters are more picky.

I have bar end shifters on my LHT, but I moved them up to the handlebars. Nifty.



I got some little devices called Pauls Thumbies that fit on the handlebar and the bar end shifters attach on to them. I also have cyclocross brake levers on the top of my bars too so I can shift and brake from the top of the bars. It all works great. The Pauls Thumbies are expensive though - $50. The Boy is quite the bike mechanic and set up all this stuff for me. A good bike shop should be able to do this too.

Here is my LHT on a tour in 2008:

[eofelis]

Also, I have been riding Surly frames for the past 5 years. They are not light and fast bikes, but I've been very impressed with the ride quality and durability of these frames.

[Catrin]

Here is my LHT on a tour in 2008:

Now that is a beautiful and hard-working bike! Thanks also for the information, I understand the attraction of bar end shifters now. It is also good to hear that they can be moved, I like the idea of their being much closer to the brakes

Thanks for the great information!

[Veronica]

I've only used bar end shifters.



It's really not that hard to take your hand off the bar to shift - less complicated and time consuming than getting a water bottle out of the cage and taking a drink.

Why do you need the shifters close to the brakes? You're not going to do both at the same time are you?

Veronica

[Catrin]

I've only used bar end shifters.

Why do you need the shifters close to the brakes? You're not going to do both at the same time are you?

Veronica

LOL, Stella (Trek 7.6) has flat bars and trigger shifters. The trigger shifters are only about an inch or so from my brake levers - so all I have to do is move my fingers a little to go from one to the other. For a novice cyclist this is very comforting

Speaking of water bottles, right now I am just stopping the bike to take a drink

[moderncyclista]

Bar ends are the bomb. Most of the time on my 520 (which has bar ends) I don't need to shift that often (I live in a very hilly part of my state) so moving to the shifters isn't a problem. Even most novices pick them up pretty quickly. I find them elegant and simple (two things I adore). Brifters have a gajillion parts and if they break you replace the whole expensive set-up. Bar ends are just a few parts and if they break are relatively inexpensive to replace (if not fix.) The thing I worry about most is braking not shifting. People have pulled out in front of me, turned in front of me, ran stop signs, and darn near killed me. Thank god for quick reflexes! I want some cyclo-cross style levers on top of the bars of my 520 now. My Aurora has em' but god I wish she had bar ends.