Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 15 of 52

Hybrid View

  1. #1
    Join Date
    Mar 2005
    Posts
    165

    Your measurements?

    I finally got around to measuring the width between my sitbones. It's a hair over 6". My husband's is 3.25"! Nonetheless, I'm trying one of his Selle Italia saddles with a gel insert today. I think it will just fit me.

    Is 6" normal? Wide? Narrow? for a girl?

  2. #2
    Join Date
    Mar 2005
    Location
    Earth- Littleton, Colorado
    Posts
    278

    How do you do the measurement???

    How do you measure? the method???
    Holistic Health Coach and Licensed Massage Therapist
    http://mandalatree.healthcoach.integ...nutrition.com/

  3. #3
    Join Date
    Mar 2005
    Posts
    165
    Quote Originally Posted by AutumnBreez
    How do you measure? the method???
    One of two ways. Easiest is probably to take a piece of paper to a hard, bumpy surface like cement. Sit on it! Your buttbones will create indentations in the paper and you can measure between them.

    I did it the hard way. Prodded around back there till I could feel the bones then stretched a tape measure between them! I later confirmed it by the paper-sitting method too.

    As an update, the saddle fit! It supported my butt better than my Selle San Marco Donna, plus I used vaseline as chamois buttter to ease the chafing, but I still have some pain (quite possibly though I sensitized my parts with yesterday's ride, where I didn't take nearly the precautions). The gel might have helped a little, but it might also have been misplaced for my anatomy, it's hard to say. I'm going to try somebody else's saddle too, and I got another, second-hand enthusiastic testimonial for the Fizik Vitesse so I'm kind of really getting tempted to try that one. (Plus half the guys on the ride today were on Fizik.

    Someday I *will* have a completely comfortable ride, LOL!

  4. #4
    Join Date
    Aug 2004
    Location
    North Texas
    Posts
    1,565

    Koobi, Koobi, Koobi

    See Favorite Saddles... I promise not to repeat my drooling praise for this saddle here

    spazz (now staring at her bicycle with wrench in hand)

    "here bikey, bikey, bikey... get into the nice bike carrier."
    no regrets!

    My ride: 2003 Specialized Allez Comp - zebra (men's 52cm), Speedplay X5 pedals, Koobi Au Enduro saddle

    Spazzdog Ink Gallery
    http://www.printroom.com/pro/gratcliff

  5. #5
    Join Date
    Aug 2003
    Location
    Bendemonium
    Posts
    9,673
    Quote Originally Posted by spazzdog
    "here bikey, bikey, bikey... get into the nice bike carrier."
    Maybe if you throw some new tubes or purty new bar tape in the box first . . .

  6. #6
    Join Date
    Jul 2004
    Posts
    2,609
    Quote Originally Posted by alison_in_oh
    I got another, second-hand enthusiastic testimonial for the Fizik Vitesse so I'm kind of really getting tempted to try that one. (Plus half the guys on the ride today were on Fizik.

    Someday I *will* have a completely comfortable ride, LOL!
    I gotta chime in - although I don't post here often. However, having 'auditioned' about 8 saddles, I've become a pro! I started out with a Fizik Vitesses - it came with my bike. It was fine on short rides, but anything over 50 miles started causing severe discomfort - pressure on all the wrong spots. I used the Specialized gel measuring thingy, and I'm 150mm - just under six inches. The Vitesse is only about 4 inches before it starts to slope down - meaning that your sitbones will be about an inch LOWER than the center of the saddle, with more weight onthe non-sitbone parts. After trying the entire Terry line, a SelleItalia that left me scarred, and a Specialized Alias, I'm very, very happy with a Specialized Avatar, in the largest size - 155mm. As far as I can tell, it's the exact same as the women's Jett model (which says 'Avatar 155' on the side, but it's a different color scheme) In the past two weeks, I've done two centuries without a complaint on this saddle. Just my 2 cents - your mileage may vary...

  7. #7
    Join Date
    Mar 2005
    Posts
    165
    Quote Originally Posted by Audio-A
    I gotta chime in - although I don't post here often. However, having 'auditioned' about 8 saddles, I've become a pro! I started out with a Fizik Vitesses - it came with my bike. It was fine on short rides, but anything over 50 miles started causing severe discomfort - pressure on all the wrong spots. I used the Specialized gel measuring thingy, and I'm 150mm - just under six inches. The Vitesse is only about 4 inches before it starts to slope down - meaning that your sitbones will be about an inch LOWER than the center of the saddle, with more weight onthe non-sitbone parts. After trying the entire Terry line, a SelleItalia that left me scarred, and a Specialized Alias, I'm very, very happy with a Specialized Avatar, in the largest size - 155mm. As far as I can tell, it's the exact same as the women's Jett model (which says 'Avatar 155' on the side, but it's a different color scheme) In the past two weeks, I've done two centuries without a complaint on this saddle. Just my 2 cents - your mileage may vary...
    Thanks, your input is very helpful! I think the saddle I'm going to borrow from a friend who likewise ran the gamut before settling on a hands-down favorite is also a Specialized.

    Did you find any trade-off in power transfer with the gel cushioned seating area?

  8. #8
    Join Date
    Jul 2004
    Posts
    2,609
    Quote Originally Posted by alison_in_oh
    Thanks, your input is very helpful! I think the saddle I'm going to borrow from a friend who likewise ran the gamut before settling on a hands-down favorite is also a Specialized.

    Did you find any trade-off in power transfer with the gel cushioned seating area?
    Terrific question, but I'll be honest. There wasn't much power transfer happening when I was in pain on the other saddles. Comparing the gel cushion to the non-gel Alias, I don't feel I gave up anything. It's such a tiny bit of gel, but apparently, just enough in exactly the right place.

    One thing that I've learned is that we are all extremely different. Given how much love there is for the Terry's, I thought those would be perfect. But, every saddle has to have SOME fans, right? So, find a source that will let you try them out - I could tell after one 50 mile ride if a saddle was a no-go. The Terry FireFly was close, but it still just wasn't ideal.

    Knowing that no matter what my ego said, I needed a wide saddle helped immensely. I could look at the rear profile of a saddle and know that it would slope down too quickly, or would be too wide through the nose, or be too squishy. But, once you find 'the one', life suddenly becomes very, very good!

  9. #9
    Join Date
    Aug 2003
    Location
    Bendemonium
    Posts
    9,673
    Quote Originally Posted by Audio-A
    I used the Specialized gel measuring thingy, and I'm 150mm - just under six inches. The Vitesse is only about 4 inches before it starts to slope down - meaning that your sitbones will be about an inch LOWER than the center of the saddle, with more weight onthe non-sitbone parts.
    Thanks, Audio. I also agree that the measurement of the saddle before it starts to slope down is the most important measurement. It's not the overall width of the saddle (other than the nose), it's whether the support spots match your sitbone measurements.

  10. #10
    Join Date
    Aug 2006
    Posts
    6

    Tried the sit bone measurements

    I've jumped from the "favorite seat" to this forum -- because I asked how to find my sit bones. I think I've found them, but I'm not as sure about my measurements. I don't have concrete near my home -- so I tried it on a textured door matt--but the marks are rather obscure--

    How exact should it be--and should I err on the side of wider vs. exact when it comes to the seat. I think I"m between 5 and 6 inches, but I'm sure that is not exact enough.

    Oh yea, do you measure from the outside to outside of the indents, or middle to middle?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •