Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2004
    Location
    Portland, Oregon
    Posts
    129

    squealing brakes?

    To disable ads, please log-in.

    So the brakes on my Redline are squealing like a stuck pig. They are clean and I've cleaned the rim and there's plenty of pad. Any ideas? It's kind of embarrassing; much like a car that has a loud muffler. Not a good idea to try and avoid braking during rush hour traffic downtown Portland on my way home!!
    Last edited by Lynne; 07-08-2005 at 12:00 PM.
    I get to have pizza after this, right? No...wait...cheesecake....

  2. #2
    Join Date
    Sep 2004
    Location
    Albuquerque, NM
    Posts
    3,099
    usually when your brakes squeal they're toed wrong. It means the back part of the brake is hitting first instead of the front. Try toeing the brake shoes so the front hits first and that should stop the squealing.
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, champagne in one hand, strawberries in the other, body thoroughly used up, totally worn out and screaming: "Yeah Baby! What a Ride!"

  3. #3
    Join Date
    Apr 2005
    Location
    Middle Earth
    Posts
    3,997
    CRC works a treat here

    Its spray on stuff for squeaky bits... we don't use grease or wax or stuff like that on our bikes... but a tiny squirt of CRC when noisy, thats all we do


    Courage does not always roar. Sometimes, it is the quiet voice at the end of the day saying,
    "I will try again tomorrow".


  4. #4
    Join Date
    Jan 2005
    Location
    Off eating cake.
    Posts
    1,700
    CRC is great stuff (right up there with No. 8 wire ). I *think* it translates as WD40 in American.

  5. #5
    Join Date
    Aug 2003
    Location
    Bendemonium
    Posts
    9,673
    If it's the pad squealing, do not spray any kind of lubricant on it. Sure, it will stop squealing but it will also stop stopping you.

    Toe-in is usually the problem as Corsair said. The pads may also be glazed. Open up the brakes and use an emery board on them. You can probably find instructions on how to adjust the angle ion Sheldon Brown's web site or just a general 'net search. Just a very thin piece of cardboard under the back end of the brake while you adjust the angle.
    Frends know gud humors when dey is hear it. ~ Da Crockydiles of ZZE.

  6. #6
    Join Date
    Aug 2005
    Location
    Jerusalem, Israel
    Posts
    7
    I had squealing brakes for a few years. My bike is now 17 years old. I went to a few bike shops in the area and each told me that replacing them would do nothing they were still good and it was just the humidity. This year I got fed up and replaced the brake pads anyway and now they are silent.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •