Welcome guest, is this your first visit? Click the "Create Account" button now to join.

To disable ads, please log-in.

Shop at TeamEstrogen.com for women's cycling apparel.

Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Join Date
    May 2012
    Posts
    6

    CAAD10 5 105 vs. Synapse 5 105 alloy

    To disable ads, please log-in.

    I am having trouble choosing between the CAAD10 and the Synapse 5. Both are aluminum and come with several of the same components. I am looking for a relatively comfortable daily rider that will also perform well on long rides and race well. I want to be able to go. I know that the CAAD10's geometry is considerably racier I just wonder if that causes discomfort on longer rides.

    I'm currently riding a Bianchi Eros that was given to me. The bike a little too big. I'm 5'2- 5'3 and weigh about 100 pounds. I plan on test riding the Synapse Carbon 5 because it's the only one in the area. Sadly I haven't been able to find any CAAD10's.

    Any suggestions or ideas that will help me with my decision?

    thanks

  2. #2
    Join Date
    May 2007
    Posts
    1,249
    I asked the same question at BikeForums and one of the kids on my team has a Caad 10. I think if the Caad 10 fits you well, it will be a great ride. Kid rode 50 mile team rides no problem whatsoever. I was consider getting one myself until I was gifted a racing frame.

    That said I did test ride a Caad 10 1 and wowzers! That baby can accelerate! It was made to race. I still kind of want one
    Help me reach my $8,000 goal for the American Lung Association! Riding Seattle to D.C. for clean air! http://larissaridesforcleanair.org
    http://action.lungusa.org/goto/larissapowers

  3. #3
    Join Date
    Jul 2011
    Location
    Sunny Central Florida
    Posts
    76
    As a Synapse owner, I"m a little biased. However, I am also around 5'2" and found this frame to the the most comfortable I've ridden. Since I'm a more mature rider, having a more upright geometry makes a huge difference to me. Haven't done any really long rides yet, but the ones I've ridden have been great - no tight shoulders/neck at the end of the ride.

    ~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~
    2009 Felt ZW100 (Gone but not forgotten)
    2010 C'Dale Synapse 5 Carbon Fem | Koobi Si Classic | "Cinders"

  4. #4
    Join Date
    Jan 2007
    Location
    Central NJ
    Posts
    866
    Are you looking at a WSD? I know the Synapse comes in this sizing, but the CAAD does not. The Synapse has a bit more relaxed geometry. But, as a Synapse owner, I've lowered my stem and made mine into a more racey geometry.
    Girl meets bike. Bike leads girl to a life of grime: http://mudandmanoloscycling.com/

  5. #5
    Join Date
    May 2012
    Posts
    6
    Quote Originally Posted by bluebug32 View Post
    Are you looking at a WSD? I know the Synapse comes in this sizing, but the CAAD does not. The Synapse has a bit more relaxed geometry. But, as a Synapse owner, I've lowered my stem and made mine into a more racey geometry.
    I am kind of looking for a WSD because I'm a smaller woman but I've been riding the mens Bianchi for so long that a smaller unisex/mens design might be alright.

  6. #6
    Join Date
    May 2012
    Posts
    6
    Quote Originally Posted by Muirenn View Post
    Do you have the chance to test-ride both?
    Sadly I only have the option of test riding the Synapse Carbon 5 or the Aluminum Synapse 7. I'm leaning more towards an aluminum frame because of price constraints.

    I'm dying to the the CAAD10 but I couldn't find any shop in West Michigan with it in my size.

  7. #7
    Join Date
    May 2007
    Posts
    1,249
    I wonder if the synapse wsd frame is actually any different from a standard one...

    While I don't have a synapse, I do have the Trek equivalent... a pilot 5.0 and the bike is super comfortable for long long long rides, but it doesn't have the snap I wish it had during races. It's just not the most responsive. Maybe a synapse owner can comment on that?
    Help me reach my $8,000 goal for the American Lung Association! Riding Seattle to D.C. for clean air! http://larissaridesforcleanair.org
    http://action.lungusa.org/goto/larissapowers

  8. #8
    Join Date
    Nov 2009
    Location
    West MI
    Posts
    4,259
    Quote Originally Posted by Reesha View Post
    I wonder if the synapse wsd frame is actually any different from a standard one...

    While I don't have a synapse, I do have the Trek equivalent... a pilot 5.0 and the bike is super comfortable for long long long rides, but it doesn't have the snap I wish it had during races. It's just not the most responsive. Maybe a synapse owner can comment on that?
    I think this year the men's and WSD are a bit different, but in the past Cdale men's and women's bikes differed only in componentry--smaller brake levers on Shimano models. My 2011 SuperSix and a WSD SuperSix were identical--but SRAM was not offered on any women's models, which is the #1 reason I am on a unisex frame (and it was orange...huzzah!).

    My previous bike was an alloy Synapse (2010 Feminine 5). Current bike is a carbon Synapse (same geo. as the SuperSix). The handling difference is like night and day--SuperSix wants to GO...Synapse took more work to get up to speed. I personally prefer the SuperSix and am very comfortable at all distances...YMMV. It helps that my frame is carbon, since most of our roads are chip-sealed and rough. The vibration with my Synapse was killing me.
    Kirsten
    run/bike log
    zoomylicious


    '11 Cannondale SuperSix 4 Rival
    '12 Salsa Mukluk 3
    '14 Seven Mudhoney S Ti/disc/Di2

  9. #9
    Join Date
    Apr 2009
    Location
    Tucson, AZ
    Posts
    4,632
    Quote Originally Posted by bluebug32 View Post
    Are you looking at a WSD? I know the Synapse comes in this sizing, but the CAAD does not. The Synapse has a bit more relaxed geometry. But, as a Synapse owner, I've lowered my stem and made mine into a more racey geometry.
    There is actually a difference between the CAAD10 models (beyond just components) this year. I hope it stays that way until I can afford one/graduate, because I rode a CAAD10 and really liked it, compared to the carbon Synapse I rode. Comfortable, smooth ride, and fast if I wanted it to be. And it's a lot cheaper!
    Last edited by Owlie; 05-22-2012 at 08:24 AM.
    At least I don't leave slime trails.
    http://wholecog.wordpress.com/

    2009 Giant Avail 3 |Specialized Jett 143

    2013 Charge Filter Apex| Specialized Jett 143
    1996(?) Giant Iguana 630|Specialized Riva


    Saving for the next one...

  10. #10
    Join Date
    May 2007
    Location
    San Antonio Heights, CA (Upland)
    Posts
    1,067
    I don't know how much help I'll be, but my first bike was a CAAD9. I didn't really know anything else, except our Burley tandem, so I had nothing to compare it to. I just knew my husband told me CAAD frames had been used in the Tour de France and we got an insane deal. I knew I had a very nice "first bike".

    When the SuperSix came out, I was drooling and REALLY wanted it. I was just biding my time, knowing there were no funds to get it anytime soon. And then my husband goes and crashes his bike and the next thing I know the owner of our LBS is dropping off a SuperSix with all my husband's old components on it.

    DOE!!!

    This did not please me. That is an understatement.

    I avoided riding it, cause I just didn't want to know what I was missing. However, I went through a period where I was trying out some different saddles. After coming back from a ride on a new saddle, I wanted to compare it to a saddle I had tried and my husband had on his bike. So I hopped on and rode it around the neighborhood without giving it much thought.

    Well, I did end up going with that saddle, but sadly I "accidentally" noticed a big difference in the feel of the bike. It was so smooooth.

    Okay, so long story short, my husband surprised me several months later by taking my bike apart and putting it back together with a SuperSix and changing out my old DuraAce components for SRAM. The DuraAce was great, of course, but they were getting warn, as they had already been on his previous bike, and then mine, and plus I think he was having a lot of guilt and wanted to make my bike extra special and updated.

    So while you wanted to know about the different between CAAD10 and Synapse 5, I can only tell you my experiences with CAAD9 and SuperSix. However, in looking up specs on both bikes, I did note that the CAAD10 has a full carbon fork (as did my CAAD9). It says the Synapse has "carbon blades". I'm not sure what that means, but the full carbon will likely provide more cushion, plus be a bit lighter..

    My husband happened to walk in while I was typing this out. He looked at the specs with me of both bikes, including the type and thickness of the aluminum and type of seat stays, etc. In general, if there's not a huge price difference and you can afford it, he thinks the CAAD10 would be slightly more comfortable, though he doesn't see there being a big difference between the two based on the specs. He does think the CAAD10 would have a better resell value, with it being a racing bike.

    I didn't look up the weight of each frame, but you might want to do that and see if there's any significant difference. I know my CAAD9 was pretty darn light.
    GO RIDE YOUR BIKE!!!

    2009 Cannondale Super Six High Modulus / SRAM Red / Selle San Marco Mantra

  11. #11
    Join Date
    May 2012
    Posts
    6
    Quote Originally Posted by Jiffer View Post
    I don't know how much help I'll be, but my first bike was a CAAD9. I didn't really know anything else, except our Burley tandem, so I had nothing to compare it to. I just knew my husband told me CAAD frames had been used in the Tour de France and we got an insane deal. I knew I had a very nice "first bike".

    When the SuperSix came out, I was drooling and REALLY wanted it. I was just biding my time, knowing there were no funds to get it anytime soon. And then my husband goes and crashes his bike and the next thing I know the owner of our LBS is dropping off a SuperSix with all my husband's old components on it.

    DOE!!!

    This did not please me. That is an understatement.

    I avoided riding it, cause I just didn't want to know what I was missing. However, I went through a period where I was trying out some different saddles. After coming back from a ride on a new saddle, I wanted to compare it to a saddle I had tried and my husband had on his bike. So I hopped on and rode it around the neighborhood without giving it much thought.

    Well, I did end up going with that saddle, but sadly I "accidentally" noticed a big difference in the feel of the bike. It was so smooooth.

    Okay, so long story short, my husband surprised me several months later by taking my bike apart and putting it back together with a SuperSix and changing out my old DuraAce components for SRAM. The DuraAce was great, of course, but they were getting warn, as they had already been on his previous bike, and then mine, and plus I think he was having a lot of guilt and wanted to make my bike extra special and updated.

    So while you wanted to know about the different between CAAD10 and Synapse 5, I can only tell you my experiences with CAAD9 and SuperSix. However, in looking up specs on both bikes, I did note that the CAAD10 has a full carbon fork (as did my CAAD9). It says the Synapse has "carbon blades". I'm not sure what that means, but the full carbon will likely provide more cushion, plus be a bit lighter..

    My husband happened to walk in while I was typing this out. He looked at the specs with me of both bikes, including the type and thickness of the aluminum and type of seat stays, etc. In general, if there's not a huge price difference and you can afford it, he thinks the CAAD10 would be slightly more comfortable, though he doesn't see there being a big difference between the two based on the specs. He does think the CAAD10 would have a better resell value, with it being a racing bike.

    I didn't look up the weight of each frame, but you might want to do that and see if there's any significant difference. I know my CAAD9 was pretty darn light.
    It sounds like the CAAD10 might be the way to go especially since someone mentioned that the Synapse picks up a lot of road buzz which I really don't want.

    I am lusting after the Super Six but I just can't afford it.

  12. #12
    Join Date
    May 2012
    Posts
    6
    Quote Originally Posted by zoom-zoom View Post
    I think this year the men's and WSD are a bit different, but in the past Cdale men's and women's bikes differed only in componentry--smaller brake levers on Shimano models. My 2011 SuperSix and a WSD SuperSix were identical--but SRAM was not offered on any women's models, which is the #1 reason I am on a unisex frame (and it was orange...huzzah!).

    My previous bike was an alloy Synapse (2010 Feminine 5). Current bike is a carbon Synapse (same geo. as the SuperSix). The handling difference is like night and day--SuperSix wants to GO...Synapse took more work to get up to speed. I personally prefer the SuperSix and am very comfortable at all distances...YMMV. It helps that my frame is carbon, since most of our roads are chip-sealed and rough. The vibration with my Synapse was killing me.
    I really do want a bike that jumps into action and wants to go. I wish I could afford the SuperSix. Let alone find one in my size in the area to test ride for fun.

  13. #13
    Join Date
    Nov 2009
    Location
    West MI
    Posts
    4,259
    Quote Originally Posted by basakadakara View Post
    It sounds like the CAAD10 might be the way to go especially since someone mentioned that the Synapse picks up a lot of road buzz which I really don't want.
    Well, the CAAD probably would pick up the same amount, if we're talking an aluminum Synapse vs. aluminum CAAD. Aluminum just tends to be sorta buzzy on roads that aren't buttery smooth. You can ride on wider tires (25mm or wider, vs 23) and keep the PSI in the 100-110 range (vs. 120), which will help with vibration.
    Kirsten
    run/bike log
    zoomylicious


    '11 Cannondale SuperSix 4 Rival
    '12 Salsa Mukluk 3
    '14 Seven Mudhoney S Ti/disc/Di2

  14. #14
    Join Date
    Apr 2009
    Location
    Tucson, AZ
    Posts
    4,632
    Quote Originally Posted by zoom-zoom View Post
    Well, the CAAD probably would pick up the same amount, if we're talking an aluminum Synapse vs. aluminum CAAD. Aluminum just tends to be sorta buzzy on roads that aren't buttery smooth. You can ride on wider tires (25mm or wider, vs 23) and keep the PSI in the 100-110 range (vs. 120), which will help with vibration.
    It really doesn't. It's a lot smoother than the relaxed-geometry aluminum bikes. DBF has the forerunner to the CAAD series, and has no problems with it on chipseal. There's something about the relaxed-geometry aluminum frames, I think. (Fun fact: I rode a carbon Synapse. It sucked.)
    At least I don't leave slime trails.
    http://wholecog.wordpress.com/

    2009 Giant Avail 3 |Specialized Jett 143

    2013 Charge Filter Apex| Specialized Jett 143
    1996(?) Giant Iguana 630|Specialized Riva


    Saving for the next one...

  15. #15
    Join Date
    Nov 2009
    Location
    West MI
    Posts
    4,259
    Interesting...so maybe it's more about geometry than material. I wish I could have compared a CAAD to my SuperSix or even my Synapse--would have saved me some money. Though they weren't as pretty.
    Kirsten
    run/bike log
    zoomylicious


    '11 Cannondale SuperSix 4 Rival
    '12 Salsa Mukluk 3
    '14 Seven Mudhoney S Ti/disc/Di2

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •