Jett, Lithia, Ruby Comparison?

I am pretty sure I am in need of a more T-shaped saddle than the pear shapes I have been trying out. I get sore toward the inside of my sit bones. I measured a few different ways and keep coming up right around 127mm center-to-center. (More than the pear shape, could it be that I'm just going too wide on saddles? Yesterday I picked up a Selle Italia Diva that is 152mm wide. Still feeling the inside soreness after just a mile on this one.)

I want to try a T-shaped saddle, but can't really find a place that compares the Specialized Jett, Lithia, and Ruby. I'm *guessing* it's mostly a padding difference? I'm going to stop by my local dealer on my way in to work, so maybe I can lay hands on one, hopefully two, but I won't hold my breath. ;)

Anyone know off the top of their head about these saddles?

I've ridden a Jett and a Lithia, never a Ruby. The main difference is the padding. But I *did* sit differently on the two saddles, just because of the level of padding. So when I switched from the Lithia to the Jett, I had to make some minor fit tweaks.

Neither one was T-shaped enough for me in the 155 mm width, in a road position. The Jett is great in an upright position on my hybrid. I'm happy on my SI Turbomatic now.

I just bought a Lithia Gel today, mainly for the width (168) and just put it on my road bike. I only took a quick spin around the block, but it felt ok so far. I am switching from a Terry Butterfly, which, after riding it for 2 years, i think is too narrow. The Lithia is quite padded, but so is the Terry Bfly, which is why I decided to try this one before the Oura (which is what the sales guy recommended).

I've tried the Jett and did not like, but everyone is different

Muirenn, do you ride on a 168mm saddle? I thought there was someone on the forum that did, but can't remember if it was you. I was just going to ask for suggestions in that wider width. (sorry, don't mean to hijack OP's tread)

I ride in a pretty relaxed position, rarely in the drops. Core strength is pretty weak, and I have not been riding a lot this year.

I think he showed me the Oura, because there weren't too many 168's in stock. I was really hesitant because it was so different from the Terry. I really went in looking for a Lithia but there weren't any 168's on the main display rack, so i was going to give the Oura a try, but my inner voice was telling me it would not work, lol. I was wandering around the store and found a Lithia 168 in a smaller saddle display rack.

Doesn't look like the Ruby's/ Toupes come in 168mm except for the Ruby Pro, which I don't think would be right for me either.

Yes, I made a list last night of the possible 168's from Specialized :) Romin EVO Comp Gel was on there, thought I didn't realize it was the equivelant of the Oura. I don't think he had the Romin in 168 though.

And interesting that you mention you have to size up in the Oura/Romin. The 168 Oura looked small to me! But it also appeared kind of domed? I dunno...it just didn't look right to me at all, lol.

Quote:

---

Originally Posted by Muirenn

Turbomatic ... tends to work better for guys.

---

Interesting - I didn't know that. I think a lot of the reason it does work for me, besides the pronounced T-shape, is the doming, that makes the cut-out effectively much more generous than it appears in a photo. Maybe it works better for guys and old freakin' ladies, both of whom have a whole lot of loose soft tissue down there. :rolleyes:

Thanks for all the info! Picked up a Toupe Expert, but it was $130!! I feel like I got taken on that one. Will try it out tonight.

Do you definitely need a saddle with a cutout? I tried a Lithia once and it was very painful, for the reason Muirenn cited. My sit bones were on the edge of the cutout.

T-shaped saddles without cutouts include the Selle San Marco Aspide Glamour and the Bontrager Affiity WSD. The Aspide Glamour is 155 mm wide and very firm. I found it uncomfortable because I needed more padding. I'm currently using a Bontrager Affinity WSD RXL saddle, which is not perfect but is very good for me. The Affinity comes in three widths and three levels of padding -- R (most padded), RL (mid-level padding) and RXL (least padded but still not as firm as the Aspide Glamour). I tried all three versions and liked the RXL best -- the others had too much padding in the nose for me, which caused some problems with numbness. However I offered both the R and RL to a friend and she preferred the R, so it may not be too padded for some people. Bontrager offers a 30-day comfort guarantee. One note about the RXL - due to the shape of the rails, you may need a different seatpost clamp, but that can be easily obtained from either Bontrager or any LBS that sells their products, and it would also be returnable if you try the saddle and decide you don't like it.

I don't think I need a cutout, no. I originally thought it would just be better in case I did. I know that's not true for everyone. Years ago I had a Terry Liberator with a cutout and it seemed to be okay, but I guess my body has changed with time. Ha! Thanks for the suggestions!

You could very well be going too wide. My sit bones measure 134 and looking at the Specialized chart my perfect saddle for road riding is supposedly 155 for everything apart from an extreme time trial position. I tried a 155 Ruby and had the same problem you had.
However, I'm now starting to question the sit bones plus 20mm rule as I'm presently riding a saddle that's only 135mm wide and my pelvic bones are directly on it.
Look at the Steve Hogg site where he discusses SMP saddles. Even if you never plan to try that particular saddle, there are two very good photos of a plastic pelvis sitting on a saddle that explains why sit bones don't actually contact a saddle unless you are bolt upright on a recumbent or pedal-forward style bike.
http://www.stevehoggbikefitting.com/...ll-about-smps/

That is something to consider, with the caveat that not everyone can (comfortably) ride on their pubic rami, either. Going narrower certainly gives one more options in terms of a T-shape.

Even for someone like me who does sit exclusively on the ischial tuberosities in a road position (which is why my soft tissue gets ground to hamburger in a deeper tuck when the rami get closer to the saddle), guidelines aren't commandments. A centimeter on each side to the outside of the outsides, is a necessary margin for tensioned leather saddles, but more of a nuance on monocoque shell saddles. How far are the outsides of your sit bones from the place on them where your weight is typically centered when you're riding straight down the road? How hard do you corner? How domed is the saddle? Do you shift around in the saddle while riding straight down the road?

Spec' at least used to have a 30 day return policy on saddles purchased from their website. So you could certainly try something narrower and see how it works for you.

Quote:

---

Originally Posted by nuliajuk

there are two very good photos of a plastic pelvis sitting on a saddle that explains why sit bones don't actually contact a saddle unless you are bolt upright on a recumbent or pedal-forward style bike.

---

Thanks for that! Funny you mention it as I actually checked out my plastic skeleton. It's got narrower ITs than I do because it's not full size, but it got the picture in my head of how it all fits together. ;)

With just a mile around my 'hood, I like the Toupe Expert better than the SI Diva already. The Diva will be returned tomorrow. I'm heading out now for a bike path ride with the Toupe to see how it goes. I did notice with this saddle that I needed to raise my stem a bit. Now I've probably fiddled with too much and have no idea where I'm supposed to be sitting or how far forward. I'll get it all worked out eventually, I'm sure. :)

:o Oops...I meant I raised the saddle (didn't raise the stem)! Got my anatomy confused. Basically, though, I went from a different saddle to the Diva without raising...then raised with the Toupe. I tried to get back on today, but I am way too sore....and on the inside edge of my sit bones. Doesn't hurt to sit anywhere else.

Once I find a saddle I like, I will get a good fitting done for sure. Thanks!

I am going to try the Bontrager Affinity if I can find it locally. Only two dealers in my area, so here's hoping! I'm not sure what level of padding, but I think I'll start with the mid-range RL and go from there. I'm pretty sure these cutouts are causing me some issues and if I don't need them, why add another issue to one that seems like a mountain anyway? Thanks for all the advice and help ladies...I'll keep you posted.

Just out of curiosity...do the cutouts bother those of you that need them? Seems like the edges would still be pretty rough on bones.

Picked up an Affinity R today -- they don't stock the RL, but will be happy to order. I can see tell that the padding on the nose may be a problem...I've lowered the nose twice. Hopefully this is the one. I'm kind of tired of running around chasing saddles. :o

I'm a little over 5'6" and the Bontrager I picked up today is probably in the middle of the rails. I think it feels pretty good. Will get a ride in tomorrow to be sure, but so far, the best of the four I've tried. Still might like the RL better, but that will be an easy test.

Just rode on my new Lithia 2 nights in a row. Really liking it so far!

How is the Bontrager Michelle?

I've been sidelined a few days with an injury, but I'm hoping to give it a good ride after work this evening. :) It feels good so far, but I may want them to order the "RL" for me to try. Glad you like your Lithia, Penny!