SRAM on Shimano

Hey there.
I have a Shimano Ultegra compact crank (50/34) on my bike and a D/A 12-25 cassette on back, running a Shimano chain through it all. Front and rear derailleurs are Dura Ace.
I'm already pondering some other options for the rear - specifically, SRAM makes a 11-26 10-spd cassette which sounds appealing...Oomph for the flats, spin for the hills.
Question:
Are there any compatibility issues running a SRAM chain or cassette on Shimano other parts?
Can a D/A rear d. handle that kind of swing?
Thanks!

Hi Regina -

I have a SRAM rear cassette (11-34!) and have had no trouble at all using it with my Shimano XTR derailleur (I know XTR is not exactly DA, but it's the mountain equivalent, or so I was told).

But my SRAM cassette is a 9-speed - not sure if that makes any difference. I'm sure others more knowledgeable than I will weigh in on the matter!

The compatibility with SRAM is one of SRAM's beauties. As far as the rear derailleurs capacity, it is the cog size not the brand. Check Shimano's website for specific info based on your exact derailleur model and cage length.

My road cannodale has and Ultegra Cassette (12-27) and RD with a SRAM chain(can't remember the model) and 105 STI's,and it works fine
My Bike friday has an 11-32 SRAM cassette, a SRAM chain, A Campy Mirage FD, A Shimano Deore RD, A Sora Crank, and 2200(think Sora) shifters. It works fine.
I Think a double D/A is rated for 27. I have a coupl of frined who have 27t cassettes with D/A RD's on thier single bikes, and it seems to work fine for them

One of my wheels has a SRAM casette on the back and works perfectly fine (all my bikes are variations of Shimano drive trains/shifters) - though I believe now that SRAM is marketing its own gruppos you would have to make sure you got the Shimano compatible casette. I believe that the cogs on the SRAM one are evenly spaced and the Shimano ones would not be, so it might cause shifting difficulties if you tried to mix and match.

Thanks all.
I did some checking around.
According to the Shimano website...the DA max spread is 11-27T (XTR and DA are both Shimano high-end, BikerZ, which is how they are "equivalent", I suspect, but the short cage of the DA vs. the long cage of the XTR result in different capacities for the spread on the cassette), so the SRAM cassette is within that. The SRAM site says that the PC1090R PowerChains - and others - are compatible with Shimano Gruppos, but doesn't talk about the 1070 Cassette re: compatibility.
It sounds like you all are not having shifting issues, so that's great to hear!

It is compatible. I run sram rival on my bike, and the deciding factor for me when I decided to go with it, is its compatibility with shimano(in case I need a teammates wheel at a race or something). I even ran a campy rear wheel the other week and it all worked beautifully.

So I say, go ahead! It will be compatible with your shimano that you are running.

I think the only thing you can't mix and match between the two brands are SRAM derailluers and Shimano shifters. :confused: