I would just take it to the LBS... and pay them.. and walk away happy..
To disable ads, please log-in.
Tire in question, 650CC Conti Gatorskins. Not the foldable kind. Somehow, I can't mount those darn things. The guy at my bike shop can, but I can't. What am I doing wrong? Dude told me to start pushing them in with my palms and thumbs from the valve part of the rim and I'm gold. But, it doesn't work. It keeps popping out somewhere else when I try to force it into the rim. I don't mind breaking a nail but something tells me that this tire will probably end in a ripped out fingernail...
"My school is the doubt in your eyes." - Tito Mukhopadhyay
I would just take it to the LBS... and pay them.. and walk away happy..
I like Bikes - Mimi
Watercolor Blog
Davidson Custom Bike - Cavaletta
Dahon 2009 Sport - Luna
Old Raleigh Mixte - Mitzi
Get a Kool-Stop.
http://www.amazon.com/Kool-Stop-Tire.../dp/B001AYML7K
- Gray 2010 carbon WSD road bike, Rivet Independence saddle
- Red hardtail 26" aluminum mountain bike, Bontrager Evoke WSD saddle
- Royal blue 2018 aluminum gravel bike, Rivet Pearl saddle
Gone but not forgotten:
- Silver 2003 aluminum road bike
- Two awesome worn out Juliana saddles
Two tricks to try. Wet the edge of the tire a bit. Mount the tire first at the valve stem with you standing and the lower edge of the rim on the floor. As you work the tire on, also push the tire down on the rim towards the floor. This should work some slack into the system such that by the time you get to the last bit you can pick the wheel up, wedge the close edge into your hip crease and roll the tire on by pushing away from you using the heels of your hands.
Hope that helps.
Living life like there's no tomorrow.
http://gorgebikefitter.com/
2007 Look Dura Ace
2010 Custom Tonic cross with discs, SRAM
2012 Moots YBB 2 x 10 Shimano XTR
2014 Soma B-Side SS
I was just having this problem with a Conti contact sport I finally used two quick sticks and was able to get it on but then I couldn't get it to seat properly. When I asked around I kept hearing ...use water or windex on the bead?
I had a problem with a new tire last fall. I spent 30 minutes being frustrated and took it to the shop. Took the mechanic about one minute. No charge, though I would have happily paid.
2016 Specialized Ruby Comp disc - Ruby Expert ti 155
2010 Surly Long Haul Trucker - Jett 143
Some tires are just that way and I find the folding bead ones to (generally) be easier to deal with. I've had to deal with that same tire in 700c and while it is a great tire for our less than perfect roads and can take a load of punishment, it's a &^%$# to put on.
A small bit of soapy water on the bead of the tires helps them slip on although some people have claimed (from mounting tubeless MTB tires using STANS) that the trapped moisture caused their rims to corrode. I've never seen this myself even though I've used a lot of soapy water to mount and seal my tubeless MTB tires. Start by making sure that the tire, as it is pushed on the rim, falls into the center of the rim where it is usually deeper, and as was mentioned, you can push the rim down on the ground to trap the tire there as you work your way around. Sometimes, if the tire just keeps slipping from the other end I use a Pedros tire lever on that side, holding it so that the tire can't back out, as I manipulate the other side. And I admit I've had to use a lever for the last bit, but you must be careful not to pinch and slice the tube if you do so.
Tzvia- rollin' slow...
Specialized Ruby Expert/mens Bontrager Inform RXL
Specialized SWorks Safire/mens Bontrager Inform RL
Giant Anthem-W XT-XTR/mens Bontrager Inform RXL
Fuji Newest 3 commuter/mens Bontrager Inform RL
Novara E.T.A commuter/mens Bontrager Inform RL
To train a dog, you must be more interesting than dirt.
Trek Project One
Trek FX 7.4 Hybrid
I just stuck a pair on. Got so irritated, I threw them in the dryer. Those bastards when on after that. I think I scared them.
Lookit, grasshopper....
Hope I didn't offend with the bastards remark. I was really steaming.
Lookit, grasshopper....