bars for a hybrid

[7rider]

Pooks, does that bike have internal shifting or grip shift? I'm not sure what bar ends will work with GripShift.

My mountain bike has Gripshift, and it has bar ends (the short, stubby ones).
My DH's flat bar road bike also has GripShift, and it also has bar ends.
(edit: Oops...I read that as "not sure *that* bar ends will work.." rather than "WHAT bar ends work" Sorry! I can check for brand tonight - but I would think your LBS can help in that regard).

So, regardless, I think bar ends would be a good, cheap option to add some hand positions to the bike, and don't require replacing the whole bar (if the bar itself is adequate, of course, and it sounds like perhaps, Pooks, you can see if the angle of the bar and reach is okay for you).

[recycle613]

I had my hybrid set up quite comfy with bar ends. First, though, I cut the bars narrower, put on ends and then opted for bar tape ... which made a nice uniform holding surface with lots of choices. Finally I realized I just prefer my hands parallel to the bike and went with drops. I also couldn't get my risers quite narrow enough for my comfort.

[pooks]

Oh wow, lots of replies since I read here.

I need to work my way through them and give this some more thought.

But yes, I have gear grips or whatever they are called, and the bar ends do work with them, because I had the LBS add them when I had my new armadillo nimbus tires put on -- which I LOVE LOVE LOVE.

The bar ends, not so sure about. Maybe because my bar is so wide that they just put my hands out wider but that doesn't help me a lot. The guy cocked them forward at the same angle my stem is angled forward, but said they could be twisted back toward me if that would help, and we could also work on the angle of the stem.

I've come to the conclusion that I can only ride and ride and ride until I learn more about my body and my bike, because people at bike stores always speak with such authority when they look at me and say, "Oh, this is what's wrong, let me adjust this," and I ride and it feels different but who knows if it's really better?

So the guy says we can change those angles and I think I should, but I'm not sure HOW yet. I'm going to read more, ride more, etc.

And drops -- are those the bars I associate with road bikes, curved under? I don't think I'd be able to use them with these gear grips... But I've been thinking I'd love to have them. I've been thinking I need a road bike eventually, though, so that's no surprise. Do people use drops with hybrids, ever?

[pll]

Hi pooks,

Did you ever get around the pain in your hands while riding? I was just looking at this thread and thought I'd recommend the grips I installed on my mountain bike -- from a German company called "Ergon". I have the "race" magnesium version, which has the longer bar ends (although they are small relative to most bar ends I have seen). These grips are extremely comfortable and I find the bar ends helpful for a different hand position.

http://www.universalcycles.com/shopp...p?category=708
or (cheaper here)
http://store.airbomb.com/items.asp?CartId={46C97FB1-F375-4A81-A7CC-3B7C060F403EVEREST7}&Cc=131%2DT%2D499&iTpStatus=1&Tp=

Another modification in my bike was to cut half an inch from each side of the handlebar. With the original width, holding the handle bar closer to the stem was more comfortable on my wrists, hence the shortening...