First clipped ride

Quote:

---

Originally Posted by andtckrtoo

I've never heard of such a thing. I start with Frog Speedplays and found that the clip tension was so light that if I went of a big bump, I cam unclipped. That was rather annoying, so after a while, I switched to SPD. My bike shop set them at a lower tension, making it easier to unclip, but my feet tend to stay clipped easily. I haven't falled with the SPD's but I've done my share of falling with the Speedplays - they may have unclipped when I went over a bump, but when I needed them to unclip they were noticeably stubborn. :D

---

These are my pedals...

http://www.ribblecycles.co.uk/produc...DA485000000000


Time RXS RXL Lady...

Well I'm a newbie to this whole clippless pedal thing but I just wanted to put my two cents in. When I got my bike it came with Shimano SPD pedals. So I went out and bought some shoes and since I didn't have a trainer. My hubby would just hold my front wheel steady and I tried to practice clipping in and out. But I could not do it. The only way I could get clipped in was if I held onto the table and he placed my foot and pushed it into the clips. So after actually taking my bike out for a spin and not being able to clip in, mind you this is after adjusting the tension every-which-way I could, I sold them on ebay and bought myself a pair of gently used eggbeaters Crank Brothers Acid 1 pedals, and I love them. As soon as I sat on my bike, I clipped in and out like a trillion times (well maybe not that much). Waited an hour and tried it again. So, now I'm in love with my eggbeaters!!! So I have since taken them on their maiden voyage and have not fallen, yet!! YET, being the key word!!

I love TE, I've found my new family!!

I remember my first clipped in ride...I feel after "forgetting" to unclip the pain of hitting the ground "helped" me remember...LOL!!

I also Rode around for like a 1/2 hour clipping and un-clipping over and over...became a habit.

When I race BMX you only have like 10 seconds to clip in before they drop the gate, so you have to have a "system" down.

Well, I went for a 10 mile ride today, my second ride on my eggbeaters and everything went great. My DH and I were just riding along when suddenly he got to close to the edge of the road and went off, but he was weaving everywhere, so I just braked really hard, to get out of the way. And at the last second i was like oh crap, I gotta unclip!!!! Well i did just in time, I didn't fall over and neither did my DH, he recovered nicely!!!

Ahhh, the wonders of going clipless! How well I remember my experience learning to clip in/ clip out.

My first clipless pedals were Performance Bicycle house-brand cheapies that came with a really bad pair of clipless shoes. They looked sort of like this, only cheaper and flimsier:

http://i235.photobucket.com/albums/e...1212676182.jpg

I see that Performance no longer sells a house brand clipless pedal. Possibly because of recalls in the late 90's. They wouldn't be the first company damaged by quality problems when dealing with crap made in China.

The pedals on my new bike (Terry Madeleine) are clipless on one side and platform (regular pedal) on the other, so if I want to hop on without clipping in, my foot won't be constantly slipping off the tiny profile presented by purely clipless pedals. They're also Real Shimano's

http://i235.photobucket.com/albums/e...f/MyPedals.jpg

These are nice, substantial pedals. I like them. Toe clips and cages scare the holy livin' crap out of me and there's no way I would even CONSIDER tying myself to the bike that way.

*SHUDDER*

When I first got clipless pedals, I actually carried handiwipes (for cleaning off road grit and ground in dirt), large gauze pads, adhesive tape, and various antibacterial agents in the car because it was a given that I was going to come back banged up, scraped up, and bleeding.

This wasn't because I kept falling off, although I did that a time or two. Or three. No, it was because I kept scraping my legs on the pedals themselves. Don't ask me how. I could never figure it out, nor could anyone watching me (and I guarantee you, pretty soon I had the WHOLE BIKE CLUB watching me trying to figure it out).

I think I just had a pair of bloodthirsty vampire pedals. They had to be lunging out at me to get a bite. There's just no other explanation. Beware cheap stuff, for one way or another, you pay for it. Apparently I was paying in blood.

The first time I rode with the clipless pedals was on a group ride (of course it would be, so the greatest possible number of people could witness my humiliation). We had barely started, coasted up to a stop sign, came to a gradual stop, I went to put my foot down and found it glued to the bike. Slowly, slowly, and oh so gracefully (not!) I listed to the left and fell over. The guy nearest me turned at the sound of the crash, looked at me calmly as I lay there stunned and entangled with my bike, and brightly said, "New clipless pedals?"

Well. I got used to them and I rode clipped in for a couple of years before giving up the old almost-fits-bike (though I didn't know that at the time). I had moved to rural MO from "bike-friendly" Portland, OR, and I was living 5 miles down a dirt road. The nearest pavement had about 3" of berm, then it generally either ran into a 50' high wall of rock, or it dropped off into a 30' ditch. And people driving down the county road believed they owned BOTH lanes. Trust me, it wasn't a place to be on a road bike. I'm pretty sure the local wolf population may have mistaken me for a deer had I tried.

Then about 3 years ago I went back to school and decided, since I was once again living surrounded by actual pavement, to try cycling again. Hauled out the old almost-fits Trek and discovered I couldn't get more than about 10 miles before I was in excruciating agony. At first I thought it was the fact that I had aged almost 10 years since last being on a bike, but eventually I convinced myself to try a Terry. The Terry was great! I put 126 miles on it the first two weeks I had it. I put the Real Shimano clipless pedals on it and (one would think) I was all set!

Here's the thing. In the nearly 3 years since I've had the bike - call it two, since I was unable to ride all last year due to an injury that resulted in frozen shoulder - I have never clipped in. Not once. I wear the shoes. I have the clipless side up. And before you know it, lickety split, I've flipped the pedal over to the "plain" side, vowing that NEXT TIME FOR SURE, I will clip in.

I'm not new to clipless pedals. It was not particularly traumatic for me to learn to use them the first time (well, other than the vampiric nature of the things, which this pair has never shown).

I have clipped in and out to make sure the tension is right, that I've got that heel twist down.

Yet when it comes to clipping in for real, I CANNOT bring myself to do it.

Riddle me THAT, Batman.