Quick question on removing pedals

To unscrew my pedals: The left pedal, unscrew clockwise? and the opposite for the right... right? :confused:

Hope my question makes sense

The right pedal has right-hand threads. The left pedal has left-hand threads. To screw pedals on, the wrench comes from back of bike to upright to front of bike. Opposite to remove. You had it right.

Deb, everyone here should be paying you a consulting fee. I love the way you explain things so coherently!

Quote:

---

Originally Posted by DebW

The right pedal has right-hand threads. The left pedal has left-hand threads. To screw pedals on, the wrench comes from back of bike to upright to front of bike. Opposite to remove. You had it right.

---

Adding "if you stand on the same side of the bike as the pedal . . . "

I just remember, "righty tighty, lefty oddie", as in the left one is odd or the opposite. I'll stand on one side of the bike to do both pedals at times.

Quote:

---

Originally Posted by SadieKate

Adding "if you stand on the same side of the bike as the pedal . . . "

---

Doesn't matter where you're standing if you always turn towards the front of the bike (though that only applies to the upper half of the wrench stroke). Avoids the right-left perspective dichotomy.

Quote:

---

Originally Posted by SadieKate

Adding "if you stand on the same side of the bike as the pedal . . . "

I just remember, "righty tighty, lefty oddie", as in the left one is odd or the opposite. I'll stand on one side of the bike to do both pedals at times.

---

I admit it. I have left/right problems sometimes (Yes, I am the problem child!). This explanation helps me keep it straight.

Quote:

---

Originally Posted by DebW

Doesn't matter where you're standing if you always turn towards the front of the bike (though that only applies to the upper half of the wrench stroke). Avoids the right-left perspective dichotomy.

---

Good for you, Deb. Doesn't always work for me. Ask Bubba. I get all goofed up unless I just think "left or right." At least I don't build a spreadsheet to do it.:rolleyes:

Then there's the method I learned in physics class for doing cross-products of vectors. You point your thumb in the direction you want the screw to pull towards, and the way your fingers curl tells you which way to turn the screw. Use right hand for right hand threads, left hand for left hand threads. But since I have trouble picking out my right hand, this doesn't work well for me.

SadieKate is right.

If you put on your pedals, then it's because you want to go on a bike ride, hence you want to go FORWARD. Screw towards the front wheel.

If you put off your pedals, you're stopping, so you want to go towards your rear wheel when you screw it off.

Another interesting note on pedals: I used to use a wrench and, well, I could never take them off. A bike mechanics I now adore has told me to put them on and off with an allen key. It works so easily, it's unbelievable. They don't need to be excessively tight either (just normally tight). It changed my life!

Quote:

---

Originally Posted by SadieKate

At least I don't build a spreadsheet to do it.:rolleyes:

---

Was that a dig at your favorite problem child? :rolleyes: Don't you roll your eyes at me!!!:rolleyes:



:rolleyes:





:rolleyes:
















:rolleyes:
























:rolleyes:




















:D

Ah HAH! I just looked at my Frogs and finally saw the light! (thanks, y'all!)

I'd been fretting that I don't have a pedal wrench, and what'll I do when I put frogs on the new bike, and how will I maintain my pedals, yadda yadda. (I'm a champion fretter! Gold medal worry-wart.)

Now I see where the allen wrench will fit, I understand which direction to turn it, and I know I don't have to crank on the things and make 'em supertight.

Whew! I really want to know how to do my own pedals, cuz the bike shop cross-threaded my flat pedals when they assembled my Kona. When i got Frogs they had to re-tap the cranks cuz it was such a mess.

Thanks, guys!! You're awesome!!

=====> AG :p

Don't forget I make my fair share of spreadsheets.:p

OK, I know why the "toward the back of the bike" doesn't work for me. I will place the pedal wrench under the chain stay or a bottom tube at times and then squeeze the chain stay and pedal wrench together to get more torque. Intuitively, this is toward the front of the bike.

I use an allen wrench also but I hate short lever arms!!!!! Unfortunately, Keos only work with allen wrenches and if a he-man type has put my pedals on for some reason, I can't get them off.

I find that the best leverage for removing stubborn pedals is to straddle the rear wheel, put your shoulder on the saddle, have the pedal to be removed in the forward position, align the pedal wrench with the crank arms (within 20 degrees if possible), and hold the opposite pedal for leverage. A rag in the wrench hand can let you apply more leverage without undue pain. A nice long pedal wrench is essential (not all pedals can take an allen). Don't forget to grease the threads when installing pedals so they will come off easier next time.

Quote:

---

Originally Posted by KnottedYet

Whew! I really want to know how to do my own pedals, cuz the bike shop cross-threaded my flat pedals when they assembled my Kona. When i got Frogs they had to re-tap the cranks cuz it was such a mess.

---

Ewww, cross-threading. I once cross-threaded a Campy Record crankset. That would have been an expensive mistake if a tap hadn't cleaned it up. Campy cranksets came with atrocious threading in the 70s. We learned to always tap them before even attempting to install a pedal for the first time. I knew a guy who crashed when his pedal pulled out of his Campy crankset.

Deb - what kind of grease? Is there one brand/type of grease that you could recommend I buy, that I could use for all grease needs?

(I only have a bottle of liquid T9. No grease. Speedplay sells a squirter thingy with grease for the Frogs. I suppose that would be a seperate grease issue, but I need a general grease.)

Thanks, oh mighty Bike Guru!