Printable View
Is a rake of 45 (head angle of 70) significantly different from a rake of 50 with a head angle of 71.5? I only know the trail of one of these, though I am trying to get the trail from Surly directly.
I am starting to understand the difference between rake, trail, and how head angle matters. I am trying to wrap my brain around the possible different handling between my LHT and the Gunnar recommended specs.
Trail for 26" wheels (assuming 1.5" tires):
70 deg Head angle with 45mm rake = 66mm trail
71.5 deg head angle with 50mm rake = 62mm trail
I personally would go with the latter. But it's not a big difference.
Margo, thank you, I had hoped you would see this. The 71.5 deg head angle with 50mm rake is what Waterford is recommending for my Gunnar custom build. It appears to have a trail of 54.7 if my fitter has recorded this properly - is that possible with the given head angle and 50mm rake? I do not know what tire size they are assuming for the Gunnar. The basic design is based on their cross frame, and they are recommending an upgraded Waterford road fork (for weight, and I won't be putting racks on this bike).Quote:
Originally Posted by lunacycles
I am looking at some hand-written notes he gave me that compares the custom specs with my LHT - and the wheels are indeed 26'. Both chainstay and wheelbase are quite a bit shorter, if that matters.
My error. I read it wrong on my CAD program (it's an image on top of an image, and my reading glasses are at work with my welding helmet:)). 71.5 h.a. with 50mm rake is 52mm, not 62mm of trail based on 26 x 1.5 inch tires (your fitter may have used a different tire profile to arrive at the other number..and it's 56mm, not 66mm of trail for the other combo). I like a trail of 60 mm plus or minus a few for this kind of bike, but builders have a lot of opinions around this based on their own biases, insofar as what constitutes "ideal handling." IMO, a higher trail is better if there is no load on the front. A lower trail will be theoretically livelier in terms of front-end handling but also maybe less stable/more "twitchy." Typical road bike trail is 55mm or so. But it also depends on your stem length, body weigh distribution, blah blah blah, as to what's best.
A fork with more rake will be more plush, theoretically. A head angle of 70 degrees is the very lowest I would go. 71.5 sounds a lot more reasonable for a frame using 26" wheels.
Ultimately, seriously, this is all within normalcy, so I'd advise that you trust your builder. It's Waterford, after all. They've been doing this a while.
Indeed, that is my perspective as well! I am just trying to better understand the design to help me justify the cost. Waterford does beautiful work and have great people :)Quote:
Originally Posted by lunacycles
My fitter encourages his clients who are getting a Waterford or Gunnar to talk directly with the frame builder so that all three of us (designer, fitter, and customer) are all happy when it is time for me to to literally sign off on the final design.
Thank you Margo, I appreciate it!
Cool. It's great you want to be in the know about all of it, even this minutiae which can make customers (and builders) a bit nutty... It's also cool you are going this route. I think it makes sense, it's great you're asking questions, and I hope you love your custom Gunnar!
I just had a nice talk with my frame designer, and during the course of our discussion she decided to relax the fork a bit to make it a little more stable - and she is also going to allow for a little more toe overlap. It was a good discussion and I have a much better understanding on why their stock sizes just won't work for me as far as fit is concerned. I knew, generally, that their stock size wouldn't fit me, but now I've a better understanding why. Of course the difference in weight alone will make a big difference in handling!
It's all good, and thanks to Margo and everyone for their patience while I work this out. It is an exciting, if expensive, process. I also know that I could be paying a lot more and a properly designed steel bike will last me far longer than I will remember the price tag :D
Those sound like good adjustments to make to the design. It's great that they're taking the time to explain all of it to you.
Basically I wanted the sales pitch - how is this better than the stock size & I want to make certain that she is almost as stable as my LHT. I learned quite a lot and she listened to me as well.
I got the sales pitch, and the design was tweaked as a result of my question. The trail was increased to 49.8 (rake was decreased to 48 from 50, head tube angle was changed from 71.5 to 71. The original trail was 44.5 according to my fitter.
I contacted Surly to find out the trail on my LHT, and THAT is quite close to 75 --- super stable to allow for heavy loads - it really is overkill unless it has a heavy load. I think this was a good change, considering what I am accustomed to, I think that the original trail would have felt twitchy.
A couple of final questions for my fitter today before I sign off on the design, and time to put some money down :D It looks like it will be possible for me to have my beautiful new bike sometime in March, barring unforeseen circumstances :cool: :D :cool: