So how does one figure out if a frame is capable of handling a wider wheelset? For example, if I get some cool old steel road bike off craigslist, could I put a wider 700c wheel in there to make it more of a hybrid/trail bike?
So how does one figure out if a frame is capable of handling a wider wheelset? For example, if I get some cool old steel road bike off craigslist, could I put a wider 700c wheel in there to make it more of a hybrid/trail bike?
It depends. You have to research the frame itself (wheel diameters and tire clearance at the top of the seat stay and at the BB) PLUS the hub width and the brake arm length.
So saying there was clearance for the tire, you'd then need to maintain hub width and change out the brakes?
PS- what's the usual difference in wheel widths between the 3 applications (road, hybrid, 29er)?
You asking about rim width, not wheel width, so it depends on the rims you're using. You can have narrow rims or wide rims depending on the application. A 29'er usually refers to a mtn bike wheel so it would have wide rims but the diameter would be close to a 700c (not exact but close).
You may not need a new wheelset, depending on how much room you have in the brakes and on the frame itself, you may be able to run 700x32 tires or something like that on an old cool steel frame.
Look at the cycocross tires.
But some frames don't have that much clearance.
Yes, I mean rim width.
So cyclocross/hybrid rims are the same width as road rims? I always thought they were wider since the tires are wider.
I'm pondering a frankenbike as a second bike. I'd like something like cyclocross functionality, but don't need the higher BB. I'd also probably use it as my commuter (and let DH have his mtn bike back), so like the idea of a lighter steel bike that's not too terribly beautiful (so it doesn't get swiped). It's just the glimmer of an idea, but there's some really cute mixtes on CL (like this) and I was pondering if I could do wider rims or tires on one of those.
I run 700x28's on road bike wheels on my surly no problem and 700x32's should also fit on the rims...
However, if there's not enough room between the tubes of the bike & the rims, you can't fit a wider tire on there. That mixte looks like it'd be fine, because of all the room between the back tire & the seat tube - some of the modern bikes don't leave much room for bigger tires.
gotcha, my roadie is definitely one you could never put a wider tire on- those tiny buggers just barely don't hit the stays width-wise.
Thanks for the info, we'll see what I come up with!
Okay guys, I didn't realize that older roadies (ie 70s) have 27in wheels, which are bigger than 700cs and have limited tire options. It seems if you have some adjustability in the brakes, you can get away with 700c wheels, but am I limited to a 700c that can only take a 5-6 speed? That'd be fine, but is this an obscure hub size? I guess some 90s 12 speeds I saw had 700c wheels, but haven't found one my size and I found this yummy Raleigh that I'm coveting. Is this a totally bad idea? I really love her lugs and chrome, but if it's going to cost me a ton in wheels, might no be worth it.
The rear hub on 8 speed and above wheels is 135 mm, I believe. I think some of the old 7 speeds are 135 mm with a spacer. Using long reach brakes or trading those might let you use 700c wheels on a 27" bike.
I've heard of people bending out the chainstays to fit a bigger hub in on older bikes but you'd probably need to have that done professionally.
Nevermind, Harris has cross type tires for 27" wheels! Harris Cyclery rocks!
They even have the Schwalbe Marathons with the reflective sidewalls! super excited!
I'm going to consider switching out 27" wheels to 700c wheels for a friend. I don't think she will appreciate the hassle of a 27" wheel. I just have to see if I have to put on long reach brakes and if my old 700c wheel with shimano gears is compatible with the current set up. any thoughts?
What hassles are you referring to? I have 27" wheels on my mixte. Wheels and tubes are easy to find. I've never really thought about it, but I see no reason to switch.
finding the tires at local shops. When I was fixing this bike up 2 years ago I had to order the tires online. Tubes are not a problem.
plus I could get rid of the old wheels that aren't very true and look like a good re-chroming is in order